7" Colour TFT display with driver board (HCMODU0096)

LCD, TFT, OLED, LED modules
badre2911
Posts: 13
Joined: Tue Jun 20, 2017 9:19 pm

Re: 7" Colour TFT display with driver board (HCMODU0096)

Post by badre2911 » Mon Jan 07, 2019 12:43 pm

yes there is a protective film, sorry, all is ok.
have you keyboard button for this board ?

andrew
Site Admin
Posts: 900
Joined: Sun Aug 05, 2012 4:15 pm

Re: 7" Colour TFT display with driver board (HCMODU0096)

Post by andrew » Mon Jan 07, 2019 8:14 pm

No, we don't stock that board I'm afraid.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

badre2911
Posts: 13
Joined: Tue Jun 20, 2017 9:19 pm

Re: 7" Colour TFT display with driver board (HCMODU0096)

Post by badre2911 » Tue Jan 08, 2019 3:07 pm

thanks a lot.
do you know if a vga adapter to hdmi works on this card? because by default the source is set on hdmi and as I do not have the keyboard I can not select the source VGA.
Regards.

andrew
Site Admin
Posts: 900
Joined: Sun Aug 05, 2012 4:15 pm

Re: 7" Colour TFT display with driver board (HCMODU0096)

Post by andrew » Tue Jan 08, 2019 3:19 pm

If you turn the controller board over you will see the pinnout for the connector in silkscreen on the underside. This is as follows:


IR-VCC
GND
IR
POWER
MENU
+++++
------
SOURCE
LED-G
LED-R

If you need to change the input you just need to connect the SOURCE pin to the GND pin using a wire or a switch. Each time you connect the source to the GND pin it will step to the next input. The on screen display will tell you what input you currently have selected. Once an input has been selected it should stay set to that input even when power is removed.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Post Reply