This water level sensor / float switch can be used to sense when a liquid has reached a set level. It makes just a magnetic float to trigger a read switch sealed inside the main sensor barrel. This makes the entire sensor waterproof and a pair of sealed wires protruding from the rear of the sensor provide connection to the read switches clean contacts. Depending on the orientation of the sensor these contacts can be normally open or normally closed.
Please note: This sensor is not suitable for directly switching high current or inductive loads.
Specification:
Product code: HCSENS0054
Max Contact Rating : 10W
Max Switching Voltage :100V DC/AC
Max Switching Current : 0.5A
Max Breakdown Voltage : 220V DC/AC
Max Contact Resistance : 100m ohm
Temperature Rating : -10 / +85 Celsuis
Float Ball Material : P.P
Float Body Material : P.P
Thread Dia(Approx) : 13mm
Size : 60mm x 30mm x 30mm
Cable Length : ~35cm
Diagrams, libraries, and example code are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.
Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.