LC MAXII Altera EPM240 CPLD development board (HCDVBD0006)

Altera development boards and accessories
andrew
Site Admin
Posts: 1374
Joined: Sun Aug 05, 2012 4:15 pm

Re: LC MAXII Altera EPM240 CPLD development board (HCDVBD0006)

Post by andrew » Thu Apr 25, 2019 1:50 pm

I believe the 5V pin is connected to the centre pin of the DC socket. So whatever voltage is applied there will appear at the 5V pin.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

nagla@gmx.net
Posts: 1
Joined: Thu Dec 10, 2020 7:48 pm

Re: LC MAXII Altera EPM240 CPLD development board (HCDVBD0006)

Post by nagla@gmx.net » Tue Dec 15, 2020 9:39 pm

While you wait for the official power supply, you can use P1 pin 19
with 3.3 Volt to make the board happy. and on P1 pin 18 you can apply ground. ( check the schematic). for me it worked. see picture
You do not have the required permissions to view the files attached to this post.

youngie
Posts: 1
Joined: Mon Mar 06, 2023 4:04 am

Re: LC MAXII Altera EPM240 CPLD development board (HCDVBD000

Post by youngie » Mon Mar 06, 2023 5:51 am

andrew wrote:
Thu Jul 03, 2014 7:46 pm
The crystal is represented by symbol P9 on the schematic. It should be connected to pin 12 on the CPLD (RI/O_GCLK0p).
I have also looked at the schematic and don't see how you get from P6 to pin location L2? I am trying to find out which pin the LED is on, this is how I got to this page, the schematic says IO77 which is two pins from the right on the top of the chip. It doesn't help that Quartus shows me a wire bond view and not a pad view. I think the LED is on A11?

andrew
Site Admin
Posts: 1374
Joined: Sun Aug 05, 2012 4:15 pm

Re: LC MAXII Altera EPM240 CPLD development board (HCDVBD0006)

Post by andrew » Mon Mar 06, 2023 3:04 pm

I am trying to find out which pin the LED is on, this is how I got to this page, the schematic says IO77 which is two pins from the right on the top of the chip. It doesn't help that Quartus shows me a wire bond view and not a pad view. I think the LED is on A11?
I'm not sure if I understand your issue but yes you are correct, the LED should be connected to IO77 (PIN_77) which is indeed the second pin from the right on the top of the chip.

In the pin planner view, you should be able to type PIN_77 in the location column for whatever node you want to assign it to.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Andy2No
Posts: 2
Joined: Sat Aug 17, 2019 3:47 pm

Re: LC MAXII Altera EPM240 CPLD development board (HCDVBD0006)

Post by Andy2No » Sun Jul 02, 2023 2:07 pm

Are the header pins pre-soldered on these, or just supplied with them unsoldered?

andrew
Site Admin
Posts: 1374
Joined: Sun Aug 05, 2012 4:15 pm

Re: LC MAXII Altera EPM240 CPLD development board (HCDVBD0006)

Post by andrew » Mon Jul 03, 2023 8:52 am

Are the header pins pre-soldered on these, or just supplied with them unsoldered?
They are already soldered to the board.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Post Reply

Return to “Altera”