DC To DC 5A Step Down Converter (HCMODU0129)

Power converter modules
Post Reply
admin
Site Admin
Posts: 794
Joined: Sun Aug 05, 2012 4:02 pm

DC To DC 5A Step Down Converter (HCMODU0129)

Post by admin » Wed Jun 27, 2018 10:57 am

Image




A high power DC - DC step down power supply module capable of supplying currents up to 5A. It has a wide input/output operating range of 5V to 30V input and 1.5V to 28V output. The module includes two large heatsinks to help dissipate heat when used at its upper operating range. Output voltage and maximum load current is adjustable by a precision multi-turn potentiometer. The combination of its ability to output voltages down to 1.5V and its adjustable current limiting (current mode) also makes the module suitable for battery charging applications. When in current limiting mode the on-board power led will turn from red to blue when the load current drops below 10% of the maximum set by the current limiting potentiometer. This provides a visual indication of when a battery is fully charged. Screw terminals provide convenient input and output connections.



Image



Specification:

Product code: HCMODU0129
Input Voltage: 5 to 30V
Output voltage: 1.5 to 28V
Max output current (continuous): 5.3A (see table)
Conversion efficiency (Vin=12.0V, Vout=5V Iload=4A): 88%
Dimensions: 65mm x 47.5mm x 23mm



Image



Hobby Components notes: Do not exceed maximum input voltage. Do not adjust output voltage potentiometer beyond maximum output voltage.


Image


Downloads
XL4016 datasheet.pdf

Disclaimer: Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do not provide any guarantees or warranties as to their accuracy or fitness for purpose. Diagrams are for illustration purposes only and may not be to scale.

Copyright notice: Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.
You do not have the required permissions to view the files attached to this post.

steve001
Posts: 15
Joined: Tue Dec 30, 2014 3:27 pm

Re: DC To DC 5A Step Down Converter (HCMODU0129)

Post by steve001 » Sat Jan 02, 2021 4:36 pm

Hello,

Is there a schematic for this module please ?
Are the mounting holes connected to any part of the circuit (must admit not checked as yet)

Steve

andrew
Site Admin
Posts: 1153
Joined: Sun Aug 05, 2012 4:15 pm

Re: DC To DC 5A Step Down Converter (HCMODU0129)

Post by andrew » Mon Jan 04, 2021 3:29 pm

Is there a schematic for this module please ?
I'm afraid we don't have a schematic for this module but I've added the datasheet for the XL4016 buck converter the module uses to the first post of this thread. This includes example schematics that will at least give you a rough idea of how it works.

Are the mounting holes connected to any part of the circuit
No, the pads for the 4 mounting holes are isolated from the rest of the circuit. Note though that there are tracks that come close to these pads so if you're using metal fixing screws/standoffs that are bigger than the pads you may want to use mica washers to isolate them.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

steve001
Posts: 15
Joined: Tue Dec 30, 2014 3:27 pm

Re: DC To DC 5A Step Down Converter (HCMODU0129)

Post by steve001 » Sun Feb 07, 2021 6:28 pm

Thank you andrew

Steve

Post Reply