forum.hobbycomponents.com

Description:

This DC to DC converter (HCMODU0018) will accept a voltage between 0.9 (see note) and 5V DC and covert to 5V DC with 200mA available via its USB type A socket.

1. PFM control DC/DC boost
2. Input 0.9-5v dc, output 5v dc
3. USB interface power supply
4. LED indicator
5. Size: 34mm x 16.2mm
6. Max output current: 200mA

Note: At maximum load current input supply voltage should be above 2.5V. Below 2.5V supply maximum output current is reduced. When no load is being applied output voltage may rise above 5V.



Schematic:





Actual bench measurements created by Hobby Components Ltd.

Datasheet:

hi,
Is there some data on the DC-D step-up converter HCMODU0018?

regards,
Andrew

As requested this has now been created. I have moved your post from its original location as it was off topic there.