12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
About resistive touch panel
Hello,
Could you suggest a model name, or manufacturer of resistive touch panel which can fits on this display ?
Diagonal dimension match to 3.2", but horizontal and vertical dimensions is too many options.
If "Hobby Components" can offer this panel I will order 20 pcs.
Thank you
Could you suggest a model name, or manufacturer of resistive touch panel which can fits on this display ?
Diagonal dimension match to 3.2", but horizontal and vertical dimensions is too many options.
If "Hobby Components" can offer this panel I will order 20 pcs.
Thank you
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
I've had a look but at the moment I'm struggling to find anything suitable for this size of screen. I assume this you are aware of the following item and it's not an option:
http://hobbycomponents.com/index.php/2- ... panel.html
http://hobbycomponents.com/index.php/2- ... panel.html
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
Re: About resistive touch panel
Hi,
Thank you for suggestion,
I was found a panel looks to fit : DPT-4W-0320128
from DOPO Tech, Chinese manufacturer,
Unfortunately, I look for small quantity.
They have a MOQ = 2000 pcs.
Kindly regards
Vesko
Thank you for suggestion,
I was found a panel looks to fit : DPT-4W-0320128
from DOPO Tech, Chinese manufacturer,
Unfortunately, I look for small quantity.
They have a MOQ = 2000 pcs.
Kindly regards
Vesko
You do not have the required permissions to view the files attached to this post.
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
Thanks looks like a suitable screen. I'm going to PM you so that the conversation doesn't get too off topic.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
Re: Re: About resistive touch panel
Thank you very munch
Since I am a ew member I cannot compose PM for the time being
Here I found a similar touch panel from other manufacturer
Kindly regards,
Vesko
Since I am a ew member I cannot compose PM for the time being
Here I found a similar touch panel from other manufacturer
Kindly regards,
Vesko
You do not have the required permissions to view the files attached to this post.
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
Didn't realise that restriction was enabled for new users. Hopefully new users can send PM's now.
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
hello can I put this screen in standby mode?
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
Do you mean via the UG8lib library or by directly writing to the displays registers?
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
Latest version I got just from mail (12864ZW written on back) doesn't seem to require any modifications, only solder jumper on small selector "S / P". Three point selector/solder pad thing. Working well currently with Raspberry Pi 3. MOSI + SCK (R/W & E) to GPIO, CS (RS) tied directly to VDD on board and seems to work well.
R10 is 0ohm, removing it backlight stops working, at least thru BLA/BLK pins.
R10 is 0ohm, removing it backlight stops working, at least thru BLA/BLK pins.
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
Thanks for the information, yes I can confirm that latest shipped batches don't have the PSB pin fixed. For these versions you should not remove the resistor R10.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.