HLK-LD2410C Human Motion/Presence Detection Radar Sensor (HCSENS0051)

Modules for various types of sensors including accelerometers. gyro's, IR motion, etc
Post Reply
Site Admin
Posts: 870
Joined: Sun Aug 05, 2012 4:02 pm

HLK-LD2410C Human Motion/Presence Detection Radar Sensor (HCSENS0051)

Post by admin » Fri Jun 16, 2023 11:00 am


LD2410C is a high-sensitivity 24GHz human presence status sensing module developed by Hi-link. Its working principle is to use FMCW frequency-modulated continuous waves to detect human targets in the set space. Combined with radar signal processing and precise human body sensing algorithms, it realises high-sensitivity human presence status sensing, and can identify human bodies in motion and stationary states. And auxiliary information such as the distance of the target can be calculated.

This product is mainly used in indoor scenes to sense whether there is a moving or micro-moving human body in the area, and output the detection results in real time. The farthest sensing distance can reach 5 meters, and the distance resolution is 0.75m.

The module has a single digital detection output pin that momentarily pull high when motion and/or presence is detected. This makes the module similar in operation to most PIR or other radar detectors and allows the module to be interfaced to microcontrollers with just 1 input pin.

Out of the box the module will detect both motion and presence at maximum range and sensitivity. However (as well as other parameters), the detection sensitivity over its 5M range can be changed in 0.75m segments via its serial interface and a Windows based software tool.

Please note: If you wish to change the modules default parameters you will need a Windows based computer and a USB to serial TTL adapter such as one of the following:

https://hobbycomponents.com/usb-interfa ... al-adaptor
https://hobbycomponents.com/usb-interfa ... rt-adapter

Product parameters
Plug and play, easy assembly
The longest sensing distance is up to 6 metres
Large detection angle, coverage up to ±60 degrees
Accurate identification within the interval, support the division of the sensing range, and shield the interference outside the interval
Multi-level intelligent parameter adjustment to meet the needs of scene changes
Visual debugging and configuration tools
Small and simplified, the minimum size is only 16mmx22mm
Supports various installation methods such as ceiling hanging and wall hanging
24GHz ISM band, compliant with FCC and CE spectrum regulations
5~12V wide voltage power supply
The ultimate cost-effective choice

Tx..........Serial output pin used for configuration via Windows software
Rx..........Serial input pin used for configuration via Windows software
OUT........Detection output pin (high = motion and/or presence detected)
VCC........5 to 12V (average current = 80mA at 5V), 5V recommended



Windows Software Config Tool


Arduino Connection Example



Windows configuration software:
LD2410 Tool EN.zip
PLEASE NOTE: Mac & Linux operating systems are not currently supported

3D Step File:

Documentation (Chinese):
HLK LD2410_Manual_Chinese.pdf

Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do not provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Sensors”