Topics related to our range of RC products.
1 post • Page 1 of 1
The RadioLink AT10 2.4GHz 10CH control system is extremely versatile and can be used by beginners and pros alike. Weighing less that 1KG, the AT10 is extremely light, given it's capabilities! Compatible with most types of RC aircraft including airplanes, gliders, helicopers and multicopters the A10 packs a huge amount of features normally found or more expensive units. Its large array of features can be configured and controlled via its 480x320 16 colour 78 x 52mm 16 TFT screen. The A10 takes advantage of modern 2.4GHz direct sequence spread spectrum technology (DSSS) to provide a robust data link to your aircraft at up to 1000 meters. The connection is also two way and with the included 10 channel receiver and power return module allowing your model to post back information to the A10 including battery voltage, RSSI and so on. The A10 also has a high 2048 resolution for all channels with a 3ms response time from stick to receiver output.
In order for you to make the most of the system and to fly safely, please be sure to read the manual, which is available on our support forum, a link to which is at the bottom of the page.
Please note that the A10 requires 8x AA batteries which are not supplied.
The AT10 is now available in two colours:
An update was released for the AT10 on the 19th of May 2015 which forces the 3-way switches and VR switches to the central position when AUX-CH is undefined. The update also improves OFFSET not being in the central position when PROG.MIX MASTER is set up on CH4.
Full instruction and setup manual is available on our github page here:
https://github.com/HobbyComponents/Radi ... ntrol-unit