PLA Filament for 3D Printing 1.75mm Gold (HC3DPR0025)
PLA Filament for 3D Printing 1.75mm Gold (HC3DPR0025)
PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.
Optimum extruder temperature is 200-220C
Optimum bed temperature is 50-70C
Type: PLA
Reel weight (approx): 1KG (1.3KG including the reel itself)
Length of Filament: approximately 350m
Colours available:
White (HC3DPR0017)
Black (HC3DPR0018)
Dark Blue (HC3DPR0019)
Flourescent Green (HC3DPR0020)
Red (HC3DPR0021)
Purple/Pink (hc3DPR0022)
Pastel Pink (HC3DPR0024)
Gold (HC3DPR0025)
Orange (HC3DPR0026)
The temperatures above are based on most printers, but please be aware that they may need adjusting depending on your printer.
Please keep the product in a dry place,and avoid direct sunlight, fire and water.
-
- Posts: 4
- Joined: Tue May 02, 2017 7:34 am
Re: PLA Filament for 3D Printing 1.75mm Gold (HC3DPR0025)
where can you get those for cheap
Re: PLA Filament for 3D Printing 1.75mm Gold (HC3DPR0025)
They are available for purchase from the 3D printing/ consumables section of our shop:
http://hobbycomponents.com/212-consumables
http://hobbycomponents.com/212-consumables
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.