TinyCircuits TinyLily Starter Kit (HCTICI0023)

TinyCircuits product range including TindyDuino and TinyLili.
Post Reply
admin
Site Admin
Posts: 866
Joined: Sun Aug 05, 2012 4:02 pm

TinyCircuits TinyLily Starter Kit (HCTICI0023)

Post by admin » Tue Mar 18, 2014 3:15 pm

Image

See our Tiny Circuits Range Here.


Description:

This kit lets you really get going to create some cool projects with the TinyLily Mini! This kit includes the TinyLily Mini Processor Board, the TinyLily Mini USB Adapter, a TinyLily 3mm Switch, a TinyLily Power Adapter, and two TinyLily 1206 LEDs of each colour (2 Amber, 2 Green, 2 Red) and basic instructions on how to get going.


Kit Contents:

HCTICI0014 - TinyLily Mini Processor Board (ASL2101)
Image
The TinyCircuits TinyLily Mini is an Arduino compatible module in an ultra compact package. Designed to be used in e-textile and wearable applications, the TinyLily Mini is very similar to the Arduino LilyPad, with the same processing power and Arduino software compatibility – but at 1/12th the size!

Arduino and LilyPad Compatible
Atmel Atmega328P processor (same as is used on the Arduino Uno and LilyPad)
Washable
Sewtabs for 8 I/O (4 Digital, 4 Analogue / Digital) and 4 Power Sewtabs (2 for power, 2 for ground)


HCTICI0015 - TinyLily Mini USB Board (ASL2111)
Image
The TinyLily Mini USB Adapter adds USB support for the TinyLily Mini via a micro-USB connector and a small 5-pin plug in connection to the TinyLily Mini and uses the very popular FTDI USB to Serial converter IC (as used on most standard Arduino models). Using this board allows you to download new sketches via the Arduino IDE to your TinyLily Mini, and also allows you to add USB communication capabilities to your projects. This board also uses the DTR line from the FTDI IC to support the auto-reset function when a new sketch is downloaded to the processor – eliminating the need a reset button on the TinyLily Mini. Power is also supplied from this board to the TinyLily Mini, and there is a resistor jumper option on the board to select either 5 Volts or 3.3 Volts (this is set to 3.3V by default).


HCTICI0021 - TinyLily 3mm Switch
Image
A nice tiny washable switch (the switch itself is just 3x3mm) in an extremely compact size and incredibly thin. This is a momentary push switch, the two contacts are connected when the switch is pushed and open when it’s released.


HCTICI0016 - TinyLily Power Adaptor Board
Image
Connect up your TinyLily Mini to standard battery packs that use the JST-PH connector. You can also use this without the JST connector with two large through holes to connect to an external power supply or battery pack.


HCTICI0018 19 & 20 - TinyLily 1206 LED's
Image
A standard size LED in an extremely compact size of 10.2mm x 4mm, with two standard TinyLily sewtabs and a current limiting resistor, so you don’t have to worry about blowing it up or adding an external resistor. This kit is supplied with 2x Red, 2x Green and 2x Amber colours.

Post Reply

Return to “TinyCircuits”