TinyCircuits USB & ICP TinyShield Adapter (HCTICI0003 & 25)

TinyCircuits product range including TindyDuino and TinyLili.
Post Reply
admin
Site Admin
Posts: 748
Joined: Sun Aug 05, 2012 4:02 pm

TinyCircuits USB & ICP TinyShield Adapter (HCTICI0003 & 25)

Post by admin » Mon Feb 17, 2014 3:56 pm

Image

See our Tiny Circuits Range Here.


HCTICI0003 TinyShield USB with top mount USB header ASD2101-R-T

Image
HCTICI0025 TinyShield USB with side mount USB header ASD2101-R


Image

The TinyShield USB & ICP add USB support for the TinyDuino via a micro-USB connector and uses the very popular FTDI USB to Serial converter IC (as used on most standard Arduino models). Using this board allows you to download new sketches via the Arduino IDE to your TinyDuino, and also allows you to add USB communication capabilities to your projects. This board supports RX and TX status LEDs so you can visualize the serial traffic to and from your TinyDuino.

This board also uses the DTR line from the FTDI IC to support the auto-reset function when a new sketch is downloaded to the processor – eliminating the need for you to hit the reset button to reprogram your TinyDuino.

Versions:

HCTICI0003 TinyShield USB with top mount USB header ASD2101-R-T
HCTICI0025 TinyShield USB with side mount USB header ASD2101-R


Image
ASD2101_Rev4.pdf
This shield uses the standard FTDI VCP drivers which can be found in the drivers folder of your Arduino IDE. The latest verion of these drivers can be downloaded directly from the FTDI website here: http://www.ftdichip.com/Drivers/VCP.htm
You do not have the required permissions to view the files attached to this post.

Post Reply