PIC K150 programming error
PIC K150 programming error
trying to programme PIC 16c67 processor. Can programme device with 0000 data, but when I try to programme with proper data I get received data error. Any Ideas??
Re: PIC K150 programming error
There's actually a thread for this programmer here: http://forum.hobbycomponents.com/viewto ... =44&t=1344
It may be worth a read, especially the last post on page 3 which explains how to adjust timings.
It may be worth a read, especially the last post on page 3 which explains how to adjust timings.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
Re: PIC K150 programming error
Glen54
A simple question.
Does your PIC16C67 have a window so that you can erase the EPROM in a UV eraser?
If there isn't a window, you get only one chance to programme the chip.
The idea with these older devices is to develop your firmware using the UV-erasable version, then programme the One Time Programmable PICs for your production units.
Cheers
A simple question.
Does your PIC16C67 have a window so that you can erase the EPROM in a UV eraser?
If there isn't a window, you get only one chance to programme the chip.
The idea with these older devices is to develop your firmware using the UV-erasable version, then programme the One Time Programmable PICs for your production units.
Cheers