HT1621 / HCMODU0136 case to 3D print
Posted: Fri Jan 29, 2021 6:59 pm
Not sure if this is the right forum for this, but i designed a 3D printable case for the 7 segment LCD modules.
Please forgive the rough print, this was done at .30mm layer height as a prototype, and it's also one i made to show only 5 of the characters, as that's all i was using for that display.. the 3D print file has a window that shows all 7 plus the battery bar graph.
https://www.thingiverse.com/thing:4742292
There's a version with and without the mounting foot,
I also made a small version of the case that's more symmetrical, BUT this one needs the header pins de-soldering/cutting and a 6 core wire soldered to it, so that's not for everyone, https://www.thingiverse.com/thing:4742570
4 M3 x 16 bolts hold it all together, threads formed in the print.
And a case i made for my self: This one is a copy of a thermometer found in bus driving simulator that i am replicating the real cab of.
Please forgive the rough print, this was done at .30mm layer height as a prototype, and it's also one i made to show only 5 of the characters, as that's all i was using for that display.. the 3D print file has a window that shows all 7 plus the battery bar graph.
https://www.thingiverse.com/thing:4742292
There's a version with and without the mounting foot,
I also made a small version of the case that's more symmetrical, BUT this one needs the header pins de-soldering/cutting and a 6 core wire soldered to it, so that's not for everyone, https://www.thingiverse.com/thing:4742570
4 M3 x 16 bolts hold it all together, threads formed in the print.
And a case i made for my self: This one is a copy of a thermometer found in bus driving simulator that i am replicating the real cab of.