EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

EDracker products
andrew
Site Admin
Posts: 976
Joined: Sun Aug 05, 2012 4:15 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by andrew » Tue May 26, 2020 12:31 pm

@juspopnap
@ARandy

We've just built up a small batch form our current stock, calibrated and tested them and they are all working perfectly. So for now i'm inclined to put this down to two a random issues. If you're still having no luck getting it to work can you email sales (at) hobbycomponents.com with your order number and we'll resolve the problem from there.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

juspopnap
Posts: 4
Joined: Fri May 22, 2020 10:09 am

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by juspopnap » Sun May 31, 2020 1:21 pm

Hi,

I'm not sure if that helps with anything, but it's worth a try.

Waiting for your email reply, I was playing with sketches a bit, and found out a way to finish Auto Gyro Bias and connect my device with 4.0.4 GUI.

Steps I took in order to succesfully complete initial Auto Calibration:
  1. Flash device with any iteration ( 4.0.5, 4.1.0, 4.1.1)
  2. Dismiss Auto Gyro Bias since it takes "forever" at this stage.
  3. Disconnect the device in GUI ( to unlock COM port access).
  4. Open Arduino IDE -> Serial Monitor.
  5. Input "V" in Serial Monitor and send:

    Commnad is defined as follows:
    Serial.println("V"); //verbose
    sendInfo();
    scl();
    outputUI = true;
    // if (DEFAULT_MPU_HZ > 101)
    dmp_set_fifo_rate(DEFAULT_MPU_HZ / 2);
    reportRawMagMatrix();


    Raw data starts to flow.
  6. Close Serial Monitor ( to unlock COM port access)
  7. Connect device again in GUI.
Result:
Auto Gyro Bias finished in several seconds.
I get gyro and temp readings
Magnetometer calibration is still unresponsive regardless sensitivity level. All brackets are blank, no points registered.

matts
Posts: 3
Joined: Mon May 18, 2020 7:25 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by matts » Thu Jun 04, 2020 6:31 pm

Hi, i've assembled my diy kit, but i can't use it. Win 10 recognice the device and i can try it under peripherals proprieties, instead under EDtracker software there's no device, any hint?

andrew
Site Admin
Posts: 976
Joined: Sun Aug 05, 2012 4:15 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by andrew » Fri Jun 05, 2020 8:11 am

Win 10 recognice the device and i can try it under peripherals proprieties
Do you mean that it is appearing as a game controller in Windows settings?


, instead under EDtracker software there's no device, any hint?
The most likely cause is that the drivers for the Pro Mico haven't installed correctly or you haven't yet installed them.

Can you open up device manager by right clicking the Windows icon in the bottom left corner of your desktop and in the menu that opens up, left click on device manager.

Then in device manager do you see the EDTracker appear as a serial COM port under the 'Ports (COM & LPT)' section when you plug it in?

If so is it showing any errors?

If not does it appear anywhere else in device manager, or as an unknown device?
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

matts
Posts: 3
Joined: Mon May 18, 2020 7:25 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by matts » Fri Jun 05, 2020 8:43 am

this is how i see
You do not have the required permissions to view the files attached to this post.

andrew
Site Admin
Posts: 976
Joined: Sun Aug 05, 2012 4:15 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by andrew » Fri Jun 05, 2020 9:53 am

Ah! I see the problem. You have the wrong version of the GUI. The one you have is for the EDTracker pro, you need the DIY version (EDTracker2-GUI-V4.0.4.zip):

http://www.edtracker.org.uk/index.php/d ... gory/4-gui
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

matts
Posts: 3
Joined: Mon May 18, 2020 7:25 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by matts » Fri Jun 05, 2020 10:10 am

Thank you very much, my friend, it seems to be working!

Post Reply