EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

EDracker products
GeriSoft
Posts: 7
Joined: Sat Jul 17, 2021 1:06 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by GeriSoft » Mon Jul 19, 2021 2:34 pm

andrew wrote:
Mon Jul 19, 2021 2:15 pm
Thanks again for checking and the additional videos. It does look to me like it's a hardware USB issue. I'll contact you shortly via your email address to sort this out.
Thank you very much!

FatherCool
Posts: 5
Joined: Thu Aug 19, 2021 1:28 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by FatherCool » Sat Sep 11, 2021 7:58 pm

I have a similar issue,

The board connects to the PC, solid connection is visable on COM port 3 as arduino leonardo however the EDtracker UI does nothing with it. This is the 4th EDtracker that I have set up and the first time the software hasn't responded to it as soon as its plugged in.

The LED on the board is constant red but it isn't talking to the UI.

FatherCool
Posts: 5
Joined: Thu Aug 19, 2021 1:28 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by FatherCool » Sun Sep 12, 2021 8:04 am

Ok not sure what was wrong but it worked but the magnetmeter was intermittent for whatever reason.

I tried to redo the soldering in case there was a dodgy connection but now I've fried the arduino board.

I will reorder a new kit.

andrew
Site Admin
Posts: 1172
Joined: Sun Aug 05, 2012 4:15 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by andrew » Sun Sep 12, 2021 4:54 pm

OK, if you think the pro micro may not be totally dead, and seeing as you're down the road from us, you can always just drop it off and I'll take a look at it myself.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

FatherCool
Posts: 5
Joined: Thu Aug 19, 2021 1:28 pm

Re: EDTracker Bundle (HCKITS0021, 21B, 21E, 21F, 21G, 21H & 21I)

Post by FatherCool » Mon Sep 13, 2021 10:46 am

No it's dead I think. It was registering before as EDtracker 2 but not working in the UI, then after it wasn't registering as all when plugged in. Think its shot now.

Post Reply

Return to “EDTracker”