![Image](http://hobbycomponents.com/images/forum/Pine64/abs_enclosure1.jpg)
![](https://hobbycomponents.com/images/forum/forum/Description.png)
ABS Enclosure suitable for PINE A64/A64+ boards. Has separate cutouts for HDMI/Ethernet/microUSB power connectors and one cutout for USB audio/wifi connectors on opposite side. The case lid has the Pine64 logo embossed onto it.
Package Contents:
1 x ABS Enclosure Case
4 x Screws
Please note:
1. There is no open hole to access microSD from outside.
2. Current Zwave module cannot fit into the casing due to its height.
![Image](http://hobbycomponents.com/images/forum/Pine64/abs_enclosure2.jpg)
![Image](http://hobbycomponents.com/images/forum/Pine64/abs_enclosure3.jpg)
![Image](http://hobbycomponents.com/images/forum/Pine64/abs_enclosure4.jpg)
![Image](http://hobbycomponents.com/images/forum/forum/Downloads.png)
Installation guide: