PCB Project Prototyping kit (HCKITS0065)

DIY kits and starter bundles
Post Reply
Site Admin
Posts: 870
Joined: Sun Aug 05, 2012 4:02 pm

PCB Project Prototyping kit (HCKITS0065)

Post by admin » Tue Apr 16, 2019 8:45 am


This kits contains a selection of useful components and consumables aimed at allowing you to quickly prototype your new project designs. Included in the kits is a reel of lead free solder, a selection of PCBs, pre-stripped and tinned jumper wires, and a selection of commonly used components. Supplied in a hard plastic storage case for easy storage and portability. For a complete list of contents see below.

Parts list:

1x Reel of lead free solder
3x PCB prototyping board (5 x 7cm)
3x PCB prototyping board (7 x 9cm)
25x 220 Ohm resistors (1% 1/4W)
25x 1K Ohm resistors (1% 1/4W)
25x 4.7K Ohm resistors (1% 1/4W)
25x 10K Ohm resistors (1% 1/4W)
5x 47uF electrolytic capacitors
5x 100nF ceramic capacitors
5x 3mm red LEDs
5x 3mm green LEDs
5x 3mm blue LEDs
1x Pack of tinned jumper wires in assorted lengths (5cm ~ 10cm) and colours (approx 130 per pack)
3x 40 pin breakable to male to male PCB headers.
3x 40 pin male to female PCB headers.
1x Case

Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.

Posts: 1
Joined: Sat Oct 31, 2020 12:14 pm

Re: PCB Project Prototyping kit (HCKITS0065)

Post by frbabos » Sat Oct 31, 2020 12:27 pm


Post Reply

Return to “Electronics Kits / Bundles”