Sorry about that, the link should be fixed now if you can give it another try.The link for downloading sketches, as provided on page 15, 404s:
http://hobbycomponents.com/starterkit
Search found 1378 matches
- Sun Dec 17, 2023 6:41 pm
- Forum: General Discussion
- Topic: Starter kit sketches
- Replies: 2
- Views: 3964
Re: Starter kit sketches
- Thu Dec 07, 2023 3:07 pm
- Forum: Components
- Topic: JSL-502 Series 5V Tolerant 5mm LEDs (HCOPTO0057-59)
- Replies: 3
- Views: 5971
Re: JSL-502 Series 5V Tolerant 5mm LEDs (HCOPTO0057-59)
The manufacturer simply states the forward voltage as 5V @20mA for all three colours. However they will actually start conducting at forward voltages of 2.2V, 2.7V & 3V for the red, green, and blue LEDs respectively. The manufacturer doesn’t mention a current limiting resistor but the measured forwa...
- Mon Nov 27, 2023 4:10 pm
- Forum: Wireless / Wired
- Topic: IR Remote Control Kit (HCKITS0006)
- Replies: 10
- Views: 23717
Re: IR Remote Control Kit (HCKITS0006)
Hi Chris, Thanks for pointing this out. We used to ship it with a 21 button remote but that was a long time ago. I’ve had a look at the listing and everything looks ok apart from the bit in the description where it says 21 buttons? I’ll get the description updated and double check the stock to make ...
- Mon Nov 20, 2023 9:02 am
- Forum: Microchip
- Topic: Pic - K150 ICSP Programmer (HCDVBD0002)
- Replies: 132
- Views: 255369
Re: Pic - K150 ICSP Programmer (HCDVBD0002)
The table in the first post of this thread is an exhaustive list of all the devices the supplied microbrn software and the K150 can program so if a device is not in that list it wont be able to program it I'm afraid.
- Thu Sep 28, 2023 7:24 am
- Forum: General Discussion
- Topic: HCMODU0134 pwm controller
- Replies: 1
- Views: 3981
Re: HCMODU0134 pwm controller
You can find a explanation under FAQ in the first post of its product thread here:
viewtopic.php?f=119&t=2855&p=7249
viewtopic.php?f=119&t=2855&p=7249
- Sun Sep 24, 2023 8:36 am
- Forum: Kits
- Topic: Hobby Components 8x8x8 Cube Kit (HCKITS0050)
- Replies: 173
- Views: 180549
- Sun Sep 24, 2023 8:32 am
- Forum: mLink
- Topic: mLink 1ch (HCMODU00182), 2ch (HCMODU0183), And 4ch (HCMODU0184) I2C / Parallel Relay Modules
- Replies: 16
- Views: 10432
Re: mLink 1ch (HCMODU00182), 2ch (HCMODU0183), And 4ch (HCMODU0184) I2C / Parallel Relay Modules
If you've not already figured out a solution here is an example based on the esphome custom switch example: Yaml file: esphome: name: mLinkRelayExample friendly_name: mLink Relay Example includes: - mLinkRelay.h libraries: - "Wire" - "mlink" esp8266: board: d1_mini_lite # Enable logging logger: # En...
- Fri Sep 22, 2023 3:31 pm
- Forum: mLink
- Topic: mLink 1ch (HCMODU00182), 2ch (HCMODU0183), And 4ch (HCMODU0184) I2C / Parallel Relay Modules
- Replies: 16
- Views: 10432
Re: mLink 1ch (HCMODU00182), 2ch (HCMODU0183), And 4ch (HCMODU0184) I2C / Parallel Relay Modules
Just for reference, we have just published the mLink library to the PlatformIO registry: https://registry.platformio.org/libraries/hobbycomponents/mlink So that should make using the mLink library with ESPHome a lot easier. To include the mLink library in your project you would just need to add it u...
- Thu Sep 21, 2023 8:11 am
- Forum: Kits
- Topic: Hobby Components 8x8x8 Cube Kit (HCKITS0050)
- Replies: 173
- Views: 180549
Re: USB to RS232 TTL Serial Interface Cable (HCCABL0015)
Thanks for the screen grab. I've circled the menu option for selecting the processor type below: Arduino_IDE_Processor_Option.png If you click on that menu option it should open a submenu that will normally list 3 processor options: ATmega328p ATmega328p (Old Bootloader) ATmega168 You'll need to sel...
- Wed Sep 20, 2023 7:58 am
- Forum: Kits
- Topic: Hobby Components 8x8x8 Cube Kit (HCKITS0050)
- Replies: 173
- Views: 180549
Re: USB to RS232 TTL Serial Interface Cable (HCCABL0015)
Loop-back worked fine. Great. That means we can rule that out as the problem. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x5c avrdude: stk500_recv(): programmer is not responding The error message simply means 'I can't upload th...