Search found 748 matches

by admin
Mon Jun 04, 2018 1:00 pm
Forum: Motor drivers
Topic: L298N Dual H-Bridge Driver Module (HCROBO0068)
Replies: 0
Views: 1911

L298N Dual H-Bridge Driver Module (HCROBO0068)

http://hobbycomponents.com/images/forum/HCROBO0068_800_600.JPG The L298N motor drive module (HCROBO0068) contains a dual channel full H-bridge driver. This driver allows up two DC motors to be independently controlled in both forward and reverse directions via a microcontroller such as an Arduino. ...
by admin
Tue May 22, 2018 4:01 pm
Forum: Privacy Policy
Topic: Forum Privacy Policy
Replies: 0
Views: 2891

Forum Privacy Policy

WHO WE ARE This forum (http://forum.hobbycomponents.com) is provided as a free service by Hobby Components Ltd. We are an on-line provider of electronic products and components aimed mainly at the hobbyist and educational markets. Our main website (web store) can be found at http://hobbycomponents....
by admin
Thu Apr 19, 2018 9:12 am
Forum: Motors & Servos
Topic: 40mm Propeller for 130 motor (HCROBO0062)
Replies: 0
Views: 2956

40mm Propeller for 130 motor (HCROBO0062)

Image
Motor not included.



These propellers measure 4cm (40mm). The fixed aperture in the centre measures approximately 1.9mm.

Diameter: 40mm
Rotating Circular Diameter: 40mm
Fixed Aperture: 1.9mm
by admin
Thu Apr 19, 2018 9:10 am
Forum: Components
Topic: Right Angled Header (HCCNIC0032-33)
Replies: 0
Views: 1494

Right Angled Header (HCCNIC0032-33)

http://www.hobbycomponents.com/images/forum/HCCNIC0032_1_800_600.JPG These right angled headers are available in 6 and 8 pin versions. HCCNIC0032 - 6 Pin http://www.hobbycomponents.com/images/forum/HCCNIC0032_1_800_600.JPG Pin Spacing: 0.1 (inch) Number of Pins: 6 Mounting Type: Through Hole HCCNIC...
by admin
Thu Apr 19, 2018 9:08 am
Forum: Components
Topic: 6mm x 6mm Mini Tact Switch/Button (HCSWIT0041)
Replies: 0
Views: 1388

6mm x 6mm Mini Tact Switch/Button (HCSWIT0041)

http://www.hobbycomponents.com/images/forum/HCSWIT0041_800_600.JPG Measuring approximately 6x6x4.3mm, these switches have 2 pins (if you need a 4 pin switch, these are available here). The pin length of these is approximately 5.5mm. The rated load is 0.1A 12V (DC) with a contact resistance of <=0.0...
by admin
Thu Apr 19, 2018 9:02 am
Forum: Components
Topic: 6mm Toggle Switch 6A 125V (HCSWIT0055)
Replies: 0
Views: 1359

6mm Toggle Switch 6A 125V (HCSWIT0055)

http://www.hobbycomponents.com/images/forum/HCSWIT0055_800_600.JPG These toggle switches are 3-pin versions and are latching type switches, meaning once you move the toggle, it will remain in place (latched) until you move it again. Specification Voltage: 6A 125V Type:MTS-102 Pin number:3-Pin Posit...
by admin
Thu Apr 19, 2018 9:01 am
Forum: Components
Topic: 6mm Tactile Push Button Switch Cap (HCSWIT0068 – 72)
Replies: 0
Views: 1305

6mm Tactile Push Button Switch Cap (HCSWIT0068 – 72)

http://www.hobbycomponents.com/images/forum/HCSWIT0068_800_600.JPG Available in various colours, these switch caps fit our 6mm switches, however we have successfully used them on 7mm switches, too. These are available in the following colours: HCSWIT0068 – Green HCSWIT0069 – Yellow HCSWIT0070 â...
by admin
Thu Apr 19, 2018 8:58 am
Forum: Components
Topic: Momentary on-off Push Button Micro Switch (HCSWIT0088)
Replies: 0
Views: 1377

Momentary on-off Push Button Micro Switch (HCSWIT0088)

http://www.hobbycomponents.com/images/forum/HCSWIT0088_800_600.JPG Low-cost, miniature push-to-make switch with a round black actuator button. Ideal for school projects and prototyping Non-locking Rated 125V AC 250mA Panel cut-out 7mm Dimensions 28mm long, Ø10.5mm These are available in red (H...
by admin
Thu Mar 22, 2018 11:53 am
Forum: Components
Topic: SN74HC74N Logic Dual D Type Flip Flop (HCCOIC0068)
Replies: 0
Views: 1470

SN74HC74N Logic Dual D Type Flip Flop (HCCOIC0068)

IMAGE TBA The Texas Instruments 74HC74N Dual D-type flip-flop with preset and CLR is available in a SO-14 package. It has full function and pin compatibility with LSTTL family and most types of the CMOS-4000 family. It features very short switching times and a fan out of 10 LSTTL loads. 2 to 6VDC su...
by admin
Thu Mar 22, 2018 11:51 am
Forum: Components
Topic: SN74HCT00N Logic Quad 2 Input NAND Gate (HCCOIC0067)
Replies: 0
Views: 1393

SN74HCT00N Logic Quad 2 Input NAND Gate (HCCOIC0067)

IMAGE TBA This Texas Instruments 74HCT00N quad 2 input NAND gate IC is available in a DIL-14 package. A part of the 74HCT range. 4.5 to 5.5VDC supply voltage 22ns propagation delay Low Power Consumption, 20-μA max. ICC DIL-14 -55°C to +125°C operating temperature Datasheet HCCOIC0067.pdf