forum.hobbycomponents.com

[IMAGE TBA] This Arduino compatible library adds the ability for an Arduino to send and receive infrared remote control codes using the NEC protocol. To receive IR commands the library requires the use of an IR receiver such as the following: https://hobbycomponents.com/opto-electronics/463-1838b-in...

https://hobbycomponents.com/images/forum/HCARDU0110_6_800_600.jpg The Hobby Components breakout shield is a quick and low cost way to add extra pin access to the standard headers provided on Arduino development boards. Using this breakout shield you can connect up to 3 (see notes below) additional ...

https://hobbycomponents.com/images/forum/HCSECU0001_800_600.jpg This item is an electrically operated fail secure latch type lock. It uses a solenoid (electromagnetic) design to electro-mechanically pull the bolt inwards (unlocked position) when power is supplied to the lock. A compression spring w...

https://hobbycomponents.com/images/forum/HCCABL0032_800_600.jpg A USB to 2.1mm DC jack cable with a built-in DC to DC step up converter which will convert the 5V DC voltage supplied by a USB socket up to 9V DC at the jack socket. This makes the cable useful for powering electronics and projects fro...

https://hobbycomponents.com/images/forum/HCKITS0065_800_600.jpg This kits contains a selection of useful components and consumables aimed at allowing you to quickly prototype your new project designs. Included in the kits is a reel of lead free solder, a selection of PCBs, pre-stripped and tinned j...

https://hobbycomponents.com/images/forum/HCMODU0134_800_600.jpg A signal generator module which is capable of generating a single PWM output with a programmable frequency between 1Hz to 150KHz and a duty cycle between 1 to 100 %. Both frequency and duty cycle can be programmed via 4 push buttons wh...

https://hobbycomponents.com/images/forum/HCMODU0136_1_800_600.jpg This item is a 6 digit 7-segment LCD display module. It features large black LCD digits displayed against a green backlight resulting in a clear and easy to read display. Communication to the module is via a 5V serial interface requi...

https://hobbycomponents.com/images/forum/HCMODU0135_1_800_600.jpg This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the Maxim MAX7219 serial LED controller IC which gives the module the ability to not only be programmed via the serial (SPI) interface of a microco...

https://hobbycomponents.com/images/forum/HCMODU0132_800_600.jpg A 3.2" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino Due, 3.3V Pro mini, 3.3V Pro micro, ESP8266, ESP32 etc. The module uses a standard serial SPI interface for communication. Besides featuring a 6...

https://hobbycomponents.com/images/forum/HCMODU0133_800_600.jpg A 2.4" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino Due, 3.3V Pro mini, 3.3V Pro micro, ESP8266, ESP32 etc. The module uses a standard serial SPI interface for communication. Besides featuring a 6...