I'm lost with my module
How do you set the pots?
I assume one turned up the led brightness ?
Only seem to be able to,detect things one inch away.
Search found 6 matches
- Thu Dec 15, 2016 12:35 am
- Forum: Sensors
- Topic: Obstacle avoidance sensor module (HCMODU0006)
- Replies: 8
- Views: 23980
- Sat Mar 12, 2016 1:24 am
- Forum: Sensors
- Topic: PIR Motion Sensor Detector Module HC-SR501 (HCMODU0003)
- Replies: 6
- Views: 21374
Re: PIR Motion Sensor Detector Module HC-SR501 (HCMODU0003)
Can I make this a 0v output when triggered instead of a 5v ? There are three solder pads on the board with L and H next to them , do I link them?
- Thu May 21, 2015 2:43 pm
- Forum: Audio
- Topic: SJ2038 power audio amplifier module (HCMODU0071)
- Replies: 2
- Views: 16169
Re: SJ2038 power audio amplifier module (HCMODU0071)
anyone know how you wire this up and what you feed in? No instructions or useful spec in the bag.
- Mon Feb 23, 2015 9:37 pm
- Forum: General Discussion
- Topic: HCROBO0005 servo pin out
- Replies: 1
- Views: 3595
HCROBO0005 servo pin out
I'm not sure why but I can't post in the servo section! So does anyone have HCROBO0005 servo pin out
I assume brown 0 red 5v and orange signal but I get nothing , is my servo faulty or does this one have odd pin outs?
I assume brown 0 red 5v and orange signal but I get nothing , is my servo faulty or does this one have odd pin outs?
- Sun Feb 15, 2015 2:53 pm
- Forum: Wireless / Wired
- Topic: Ethernet Module (HCARDU0028)
- Replies: 43
- Views: 95510
Re: Ethernet Module (HCARDU0028)
Wow I just came across this seems to fix the problems.
Part one shows wiring connections if you need that as well
But this shows how to use the original IDE library with this module!
http://youtu.be/GP48GvNJOE4
Part one shows wiring connections if you need that as well
But this shows how to use the original IDE library with this module!
http://youtu.be/GP48GvNJOE4
- Sat Feb 14, 2015 11:53 pm
- Forum: Wireless / Wired
- Topic: Ethernet Module (HCARDU0028)
- Replies: 43
- Views: 95510
Re: Ethernet Module (HCARDU0028)
Slightly worried now! I thought I saw a post saying this used the standard library , which I have just about worked out with my current uno shield. I bought a couple of pro minis and thought adding a small Ethernet module would be an inexpensive way to monitor my door lock over the internet. It seem...