Search found 6 matches

by Scuba_2
Thu Dec 15, 2016 12:35 am
Forum: Sensors
Topic: Obstacle avoidance sensor module (HCMODU0006)
Replies: 8
Views: 17491

Re: Obstacle avoidance sensor module (HCMODU0006)

I'm lost with my module
How do you set the pots?
I assume one turned up the led brightness ?
Only seem to be able to,detect things one inch away.
by Scuba_2
Sat Mar 12, 2016 1:24 am
Forum: Sensors
Topic: PIR Motion Sensor Detector Module HC-SR501 (HCMODU0003)
Replies: 6
Views: 16370

Re: PIR Motion Sensor Detector Module HC-SR501 (HCMODU0003)

Can I make this a 0v output when triggered instead of a 5v ? There are three solder pads on the board with L and H next to them , do I link them?
by Scuba_2
Thu May 21, 2015 2:43 pm
Forum: Audio
Topic: SJ2038 power audio amplifier module (HCMODU0071)
Replies: 2
Views: 12895

Re: SJ2038 power audio amplifier module (HCMODU0071)

anyone know how you wire this up and what you feed in? No instructions or useful spec in the bag.
by Scuba_2
Mon Feb 23, 2015 9:37 pm
Forum: General Discussion
Topic: HCROBO0005 servo pin out
Replies: 1
Views: 1889

HCROBO0005 servo pin out

I'm not sure why but I can't post in the servo section! So does anyone have HCROBO0005 servo pin out
I assume brown 0 red 5v and orange signal but I get nothing , is my servo faulty or does this one have odd pin outs?
by Scuba_2
Sun Feb 15, 2015 2:53 pm
Forum: Wireless / Wired
Topic: Ethernet Module (HCARDU0028)
Replies: 43
Views: 66415

Re: Ethernet Module (HCARDU0028)

Wow I just came across this seems to fix the problems.
Part one shows wiring connections if you need that as well
But this shows how to use the original IDE library with this module!
http://youtu.be/GP48GvNJOE4
by Scuba_2
Sat Feb 14, 2015 11:53 pm
Forum: Wireless / Wired
Topic: Ethernet Module (HCARDU0028)
Replies: 43
Views: 66415

Re: Ethernet Module (HCARDU0028)

Slightly worried now! I thought I saw a post saying this used the standard library , which I have just about worked out with my current uno shield. I bought a couple of pro minis and thought adding a small Ethernet module would be an inexpensive way to monitor my door lock over the internet. It seem...