forum.hobbycomponents.com

Sorry, just a couple more questions... 1) Do you use your Arduino IDE to upload sketches to another Arduino board(s)? Just want to try an rule out a problem with the IDE itself. 2) In board manager (Tools->Board:ATMega328->Boards Manager) what version of the Minicore board files do you have installe...

I'm thinking this is more of a Minicore issue, but thought I'd check in here first in case you had any insights.

Thanks for the replies. I'm also suspecting an issue with the minicore files. I'll get one set up to see if I can replicate the error and get back to you.

System wide configuration file is "C:\Users\Mike\Documents\Arduino\hardware\MiniCore\avr/avrdude.conf" avrdude: error at C:\Users\Mike\Documents\Arduino\hardware\MiniCore\avr/avrdude.conf:421: syntax error avrdude: error reading system wide configuration file "C:\Users\Mike\Documents\Arduino\hardwa...

Would this allow a suitable heating (menu P0 Heat C/H ) circuit to terminate the charge? I don't see any reason why it couldn't be used in that way. So long as you can ensure that the battery does stay within its temperature specification when charging, the modules heating mode should work. I would...

I'm afraid we don't stock that part.

Thanks for the feedback.

. I removed the bezel and noticed that there is no connections between the the display and the breakout board pc. Back of the display itself there is just a rubber pad where the contacts should be. Yes, that rubber strip is actually the thing that connects the LCD substrate to the PCB. If you look ...

The link to the library is at the very bottom of the first post of this thread (under the heading 'Downloads'):

viewtopic.php?p=4956#p4956

Note you will need to be logged in to download it.

New to the store and putting together the pieces for the first of a few planned projects based on LoRa for communication. I wondered if you had given any thought to stocking at least one low cost LoRa module? Yes, this is something we defiantly want to stock in the near future but at the moment I c...

OK I now have prolific driver version 3.3.11.152 dated 12/3/2010 installed.
Is that correct?

Yes that is the correct one.