forum.hobbycomponents.com

https://hobbycomponents.com/images/forum/HCDVBD0037_1024_768.jpg The ESP-12F WiFi module was developed by Ai-Thinker Technology. The core processor ESP8266 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU in a small package with 16-bit Lite mode, clocked at Supports 8...

https://hobbycomponents.com/images/forum/HCFUWE0001_1024_768.jpg SR60-050 PTC thermistor, with rated working voltage of 60V and rated maintenance current of 0.5A, is suitable for circuits with higher rated working voltage, widely used in lamp, miniature motor, transformer, fire alarm and safety pro...

https://hobbycomponents.com/images/forum/HCMODU0172_1024_768.jpg This is a compact GPS module made by open-smart and utilises the GT-U7 GPS receiver. The module also includes a USB serial interface which can be accessed via a micro USB connector or directly via its 0.1” pitch serial TTL header (sup...

https://hobbycomponents.com/images/forum/HCROBO0061_1_1024_768.jpg A small low profile, low power 5V DC motor with a no load rotational speed of 5600 RPM and no load current consumption of just 55mA. This low power requirement means that this motor can also be powered from a small solar panel. The ...

https://hobbycomponents.com/images/forum/HCMODU0171_1_1024_768.jpg The Mini USBTinyISP programmer is a more compact version of the popular USBTinyISP programmer. It is ideally suited for in circuit programming of AVR devices or for reflashing bootloaders or sketches into Arduino based products. It ...

https://hobbycomponents.com/images/forum/pir/HCSENS0048_1024_768.jpg The SR505 is a miniature PIR module which uses a pyroelectric sensor similar to the one found in the common SR501 but in a more compact form factor. It can be powered from a 5 to 12V supply and when triggered its output pin will g...

https://hobbycomponents.com/images/forum/pir/HCSENS0046_1024_768.jpg The AM312 is an ultra-miniature PIR module which uses a pyroelectric sensor similar to the one found in the common SR501 but in a more compact form factor. This sensor also has the advantage of being ultra-low power with a quiesce...

This guide will step you through the process of soldering the PCBs found in the DIY EDTracker kit together in the correct order. Note that this guide is for kits shipped with the MPU9250 sensor module. The DIY EDTracker kit should contain the following components: 1x EDTracker PCB 1x Arduino compati...

EDTracker quick start guide This forum thread is intended to get customers that have purchased one of our range of DIY edtracker kits (self build or pre-built versions) up and running quickly. Note that our EDTracker kits come with the Pro Micro pre-flashed with the correct version of firmware and ...

http://hobbycomponents.com/images/forum/HCMODU0170_1024_768_2.jpg This item is a 6 digit 7-segment LCD display module. It features large black LCD digits displayed against a white backlight resulting in a clear and easy to read display. Communication to the module is via a 5V serial interface requi...