Search found 26 matches

by ILYBTodd
Thu Jan 14, 2021 9:14 pm
Forum: 3D Printing / CNC
Topic: RepRap Mega Pololu Compatible Shield - RAMPS (HC3DPR0002)
Replies: 8
Views: 14061

Re: RepRap Mega Pololu Compatible Shield - RAMPS (HC3DPR0002)

Thanks again!
Ah the three pin next to the reset is an input not an out then.
To get up and running I will use the supplied step down adapter and plug into the 12V fan pins just to be safe.

Todd

p.s. fan draws 105 mA per the data sheet. This might be more in line.
by ILYBTodd
Wed Jan 13, 2021 3:18 pm
Forum: 3D Printing / CNC
Topic: RepRap Mega Pololu Compatible Shield - RAMPS (HC3DPR0002)
Replies: 8
Views: 14061

Re: RepRap Mega Pololu Compatible Shield - RAMPS (HC3DPR0002)

Hi Andrew, I picked up a 5V fan for a new hot end and I'm curious where best to connect to the RAMPS board if there is a suitably rated 5V pin like those on the servo rails or the one near the poly fuses that could be used instead of having to step down the 12V supply currently used to power the fan...
by ILYBTodd
Wed Jan 06, 2021 10:32 pm
Forum: Arduino
Topic: HC8x8x8Cube library for H.C. 8x8x8 LED Cube Kit (HCKITS0050)
Replies: 4
Views: 6954

Re: HC8x8x8Cube library for H.C. 8x8x8 LED Cube Kit (HCKITS0050)

Andrew,

Do you know anything about what might be required to be done to the zip file to allow me to upload it to the Custom Library folder in create.Arduino.cc ?

https://forum.arduino.cc/index.php?topic=639807.0

Suggests a library.properties file in the root folder could fix the issue.

Todd
by ILYBTodd
Mon Jan 04, 2021 6:09 pm
Forum: Kits
Topic: Hobby Components 8x8x8 Cube Kit (HCKITS0050)
Replies: 137
Views: 98003

Re: Hobby Components 8x8x8 Cube Kit (HCKITS0050)

As always very helpful. I received a cheap LED cube as a gift that was preprogrammed on an STC chip and got frustrated with lack of documentation or help. It didn't work well. It was good for the soldering practice if nothing else. Your kit and your support made all the difference and now I've made ...
by ILYBTodd
Mon Jan 04, 2021 1:44 am
Forum: Kits
Topic: Hobby Components 8x8x8 Cube Kit (HCKITS0050)
Replies: 137
Views: 98003

Re: Hobby Components 8x8x8 Cube Kit (HCKITS0050)

Hi Andrew,

Any suggestions for where to find more patterns to expand the display offering even more?

Or perhaps where to learn how to write your own? Most searches I've done come back with how to build not how to write for an 8x8x8 LED cube.

Todd
by ILYBTodd
Mon Dec 07, 2020 2:09 pm
Forum: RTC
Topic: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)
Replies: 13
Views: 27711

Re: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)

andrew wrote:
Thu Dec 03, 2020 10:07 am
Hi Todd, I've now added diagram showing the dimensions to the first post.
Are the mounting holes 2mm?
by ILYBTodd
Thu Dec 03, 2020 9:24 pm
Forum: RTC
Topic: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)
Replies: 13
Views: 27711

Re: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)

You're the greatest!

Thanks so much.

OK, next newbie (sort of) question. What is purpose of the three solder pads labeled A0, A1, A2? I don't see them described anywhere.
by ILYBTodd
Thu Dec 03, 2020 12:03 am
Forum: RTC
Topic: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)
Replies: 13
Views: 27711

Re: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)

Do you have the mounting hole spacing available to share please?
Would like to design a mount to be 3D printed.
Todd
by ILYBTodd
Fri Nov 27, 2020 12:55 am
Forum: Cases
Topic: Low profile Perspex Case For Arduino Uno (HCCASE0006)
Replies: 5
Views: 16135

Re: Low profile Perspex Case For Arduino Uno (HCCASE0006)

Hey Andrew,

Can you produce a UNO+ compatible version of this case?

Something with double wide slots and a window for the extra pinouts near the ICSP pins would complement the UNO+ nicely.

Let me know when they will be offered and I'll order a hand full. :-)

Todd
by ILYBTodd
Fri Nov 27, 2020 12:47 am
Forum: Cases
Topic: Low profile Perspex Case For Arduino Uno (HCCASE0006)
Replies: 5
Views: 16135

Re: Low profile Perspex Case For Arduino Uno (HCCASE0006)

Hey Andrew,

Can you produce a UNO+ compatible version of this case?

Something with double wide slots and a window for the extra pinouts near the ICSP pins would be complement the UNO+ nicely.

Let me know when they will be offered and I'll order a hand full. :-)

Todd