Capacitive Touch LED Switch (HCSWIT0063 to 66)

Modules for various types of sensors including accelerometers. gyro's, IR motion, etc
Post Reply
admin
Site Admin
Posts: 725
Joined: Sun Aug 05, 2012 4:02 pm

Capacitive Touch LED Switch (HCSWIT0063 to 66)

Post by admin » Wed Jun 27, 2018 3:35 pm

Image




A small illuminated capacitive toggle switch. This touch sensitive switch will toggle between its on and off state each time its front panel is touched (note that the switch can be modified to operate as a momentary switch - see note below). When in the on state the switch will illuminate via an LED backlight changing the switch from the opaque white to one of 4 colours (red, yellow, green or blue depending on version). It has a single digital output of either 0V when the switch is in the off state or 3.3V when in the on state, making it suitable for directly interfacing to a digital pin of either a 3.3V or 5V microcontroller. The switch can be powered by a single supply ranging from between 3.3 and 5.5V. Because the switch uses capacitive sensing it will also work when placed behind some materials, such as glass or acrylic perspex up to 3mm in depth.



Image



Specification:

Product code: HCSWIT0063 (red), HCSWIT0064 (green), HCSWIT0065 (blue), HCSWIT0066 (yellow)
Supply voltage: 3.3V to 5.5V
Supply current (off state): 0.65mA
Supply current (on state): 7.3mA
Output voltage: 0V (off) 3.3V (on)
Dimensions in connector: 16mm x 20.5mm x 12mm


Image


Momentary mode modification:

The switches mode of operation can be changed from toggle to momentary by shorting out the pads shown in the image below. This can be done by either bridging the pads with a small amount of solder or soldering a surface mount 0 ohm resistor onto the pads. Please note that this modification should only be attempted if you have some soldering experience.

Image




Disclaimer: Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do not provide any guarantees or warranties as to their accuracy or fitness for purpose. Diagrams are for illustration purposes only and may not be to scale.

Copyright notice: Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.

Post Reply