L298N Stepper Motor Driver Controller Board (HCARDU0013)

Stepper and DC type motor drivers
savi

Re: L298N Stepper Motor Driver Controller Board (HCARDU0013)

Post by savi » Wed Feb 13, 2013 11:36 am

Come si collega un motore stepper con il driver :oops:

Grazie per la cortesia

admin
Site Admin
Posts: 726
Joined: Sun Aug 05, 2012 4:02 pm

Re: L298N Stepper Motor Driver Controller Board (HCARDU0013)

Post by admin » Wed Feb 13, 2013 12:04 pm

Hi,

You need to be logged in to download attachments. Once you are logged it you will see a zip file containing information on how to use this module.

sportsnapper
Posts: 1
Joined: Thu Feb 07, 2013 2:09 pm

Re: L298N Stepper Motor Driver Controller Board (HCARDU0013)

Post by sportsnapper » Mon Feb 25, 2013 11:31 am

Hi,

Have you a better quality schmatic than the one in the document? I'm struggling to read the grey labels ;)

And the pictures of the board on pages two/three isn't the board on the front cover, or the one in my hand! I'm assuming they are logically the same?

G

admin
Site Admin
Posts: 726
Joined: Sun Aug 05, 2012 4:02 pm

Re: L298N Stepper Motor Driver Controller Board (HCARDU0013)

Post by admin » Mon Feb 25, 2013 2:47 pm

Hi,

Unfortunately this is the best schematic that have access to. You are correct in that the board pictured is slightly out of date as this was the model of board that we originally sold. However the differences between the old board and the one we currently sell are very minor, mainly the addition of a GND and +5V terminal on the interface header.

syedamerali
Posts: 5
Joined: Wed Jan 01, 2014 12:28 pm

Re: L298N Stepper Motor Driver Controller Board (HCARDU0013)

Post by syedamerali » Wed Jan 01, 2014 1:14 pm

I am new to this board did not know how to start a new thread - can we have some more detailed information on this board: HCMODU0029

admin
Site Admin
Posts: 726
Joined: Sun Aug 05, 2012 4:02 pm

Re: L298N Stepper Motor Driver Controller Board (HCARDU0013)

Post by admin » Thu Jan 02, 2014 1:34 pm

Added as requested, please see topic: http://forum.hobbycomponents.com/viewto ... =39&t=1512

Post Reply