SN74HC139N - Decoder / Demultiplexer (HCCOIC0058)

Resistors, capacitors, transistors, LED's IC's, etc.
Post Reply
admin
Site Admin
Posts: 865
Joined: Sun Aug 05, 2012 4:02 pm

SN74HC139N - Decoder / Demultiplexer (HCCOIC0058)

Post by admin » Thu Mar 22, 2018 11:37 am

Image



The SN74HC139N is a 2-to-4 dual Decoder/Demultiplexer designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay time of these decoders and the enable time of the memory usually are less than the typical access time of the memory. This means that the effective system delay introduced by the decoders is negligible. The active-low enable (G\) input can be used as a data line in demultiplexing applications. It features fully buffered inputs, each of which represents only one normalized load to its driving circuit.

  • Targeted specifically for high-speed memory decoders and data-transmission systems
    Incorporate two enable inputs to simplify cascading and/or data reception
    Outputs can drive up to 10 LSTTL loads
    10ns Typical tpd
    80µA Maximum low power consumption
    ±4mA Output drive at 5V
    1µA Maximum low input current
Datasheet
HCCOIC0058.pdf
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Components”