L9110H Motor Driver IC (HCCOIC0038)

Resistors, capacitors, transistors, LED's IC's, etc.
Post Reply
admin
Site Admin
Posts: 865
Joined: Sun Aug 05, 2012 4:02 pm

L9110H Motor Driver IC (HCCOIC0038)

Post by admin » Wed Aug 31, 2016 1:30 pm

Image



The L9110H is a compact 8 pin DIL integrated device designed to directly to control and drive a DC motor. It has two TTL / CMOS compatible digital inputs that allow for full control of the motor in both directions. The control pins can be directly connected to most microcontrollers and with the use of PWM full speed control in both direction can be obtained. The internal H-bridge circuit has two output terminals which can directly drive a DC motor without the need for additional components. It has a relatively large current driving capability and its low output saturation voltage with built-in clamp diode reduces the impact of the current surges when switch power to the motor. L9110 is widely used in robotic cars, as part of a stepper motor driver, and for switching power LED devices.


Features

Low quiescent current;

Wide supply voltage range: 2.5V-12V
800mA continuous current output capability per channel
Lower saturation voltage
TTL / CMOS output level compatible, and can be directly connected to the CPU
Output built-in clamp diodes for inductive load
Integrated control and drive into a monolithic IC
High-voltage protection function
Operating temperature: 0 ℃ -80 ℃.


Pinout

Image



Datasheet
HCCOIC0038_Datasheet.pdf

Disclaimer: Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.
You do not have the required permissions to view the files attached to this post.

Brandayyee
Posts: 1
Joined: Thu Feb 22, 2018 6:40 am

Re: L9110H Motor Driver IC (HCCOIC0038)

Post by Brandayyee » Thu Feb 22, 2018 6:49 am

Do you have the library file for this? I need it to make the schematic of the circuit board I am making.

andrew
Site Admin
Posts: 1374
Joined: Sun Aug 05, 2012 4:15 pm

Re: L9110H Motor Driver IC (HCCOIC0038)

Post by andrew » Thu Feb 22, 2018 9:23 am

I'm not totally sure what it is you require. Are you asking for a schematic, pinout, datasheet, or software library for a microcontroller such as an Arduino?
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Post Reply

Return to “Components”