Minebea 17PM Hybrid Stepper Motor (HCROBO0010)

Various stepper / DC motors and servo's
Post Reply
admin
Site Admin
Posts: 865
Joined: Sun Aug 05, 2012 4:02 pm

Minebea 17PM Hybrid Stepper Motor (HCROBO0010)

Post by admin » Thu Jul 18, 2013 12:42 pm

Image

Description:

These motors rotate at fixed angles by digitally controlled electronic pulses. Hybrid-type stepping motor combine a rotor with a permanent magnet and a magnetic body using ball bearings. Bearings are crucial to motor precision. Minebea's hybrid type stepping motors use high-precision ball bearings manufactured in-house greatly contributing to the precision and reliability of these products.

The Minebea hybrid stepper motor is similar in design to the Nema 17 motor making it ideal for use in robotics and 3D printer applications.

Specification:

Model: 17PM-K049U
Step Angle: 1.8 degrees
Rated Current: ~0.8A
Resistance: 3.1~8.3 Ohm
Holding Torque: 200mNm
Inductance: 3.2~8.1
Rotor Inertia: 37 g・ cm3
Detent Torque 10.8 mNm
Mass: 200g


Dimentions:

Image

L = 34mm

Note: Version supplied is leaded version and does not include connector shown in diagram.

Connections:

RED.......A
YEL......./A
BLU.......B
ORG....../B

Post Reply

Return to “Motors & Servos”