Altera FPGA/CPLD USB programmer (HCDVBD0007)
Order Yours Here.
Usb ISP programmer for programming Altera's range of FPGA and CPLD device. This programmer is also idealy suited for our own Altera development boards such as item HCDVBD0006
. This programmer is compatible with Altera's Quartus development tools (Use USB blaster in programmer hardware settings).
1 X device
1 X USB cable
1 X 10pin JTAGE cable
You can purchase yours here.
Supports 1.5V,1.8V,2.5V,3.5V and 5.0V.
Support all ALTERA products : CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K ) ;Active serial configuration device (EPCS1, EPCS4, EPCS16)
Supports AS, PS and JTAG program ( with Verify and BankCheck function).
Supports embedded logic analyser function of SignalTapII
Supports NIOS II communication and debugger -- When you use it to debug your Black Gold , it will not Pop-up warning
Faster -- about 6 times than ByteblasterII
100% compatible with Official ALTERA USB Blaster
Drivers for this programmer are provided as part of the Altera Quartus software. You can download the free (web) version of this software from the link below. Once downloaded and installed the drivers can be found in the following path:
Drivers for this programmer are included in this software. Warning - Large download!Altera Quartus II Web Edition (13.0)Altera Quartus Prime Lite Edition (15.1)FAQ:Does this program support the Altera....?
This programmer is compatible with the Altera USB blaster download cable. We have not been able to test the entire rage of supported devices ourselves but here is the current supported list:
Stratix® FPGA Series, Cyclone® FPGA Series, MercuryTM Devices, ACEX 1K® Devices, APEXTM II Devices, APEX 20K Devices, APEX 20KE Devices, APEX 20KC Devices, FLEX 10K® Devices, FLEX 10KA Devices, FLEX 10KE Devices, FLEX® 8000 Devices, FLEX 6000 Devices, MAX II Devices, MAX 7000A Devices, MAX 7000B Devices, MAX 7000S Devices, MAX 3000A Devices, ExcaliburTM Devices, Serial Configuration Devices, Enhanced Configuration DevicesWill this program devices not manufactured by Altera?
No, it is not a general purpose JTAG programmer and will only program Altera devices in the supported list above.
I am trying to use the programmer with the Linux version of the Quartus II. It sees the programmer but when I try to use it just says failed. How do I fix this?
This is a permissions issue. See the 3rd post in this thread for a solution.