Reply to topic  [ 99 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10  Next
Pic - K150 ICSP Programmer (HCDVBD0002) 
Author Message

Joined: Mon Mar 31, 2014 7:53 pm
Posts: 4
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
HI
I HAVE GOT IT WORKING ITS SAYS ITS PROGRAMMED THE CHIP 16F631 BUT WHEN I TRY THE DEVICE IN CIRCUIT IT DOSEN,T WORK YET IT SAYS VERFIED PUT BACK THE CHIP I COPIED FROM WORKS FINE IAM NOT TO WELL UP ON THIS BUT LOOKING AT THE ROM ITS JUST GOT ZEROES & ON THE EEPROM BIT ITS JUST GOT A LOAD OF FFF BUT IT SAYS THE FILE IS 6K NOT TO SURE IF THIS IS RIGHT OR IF THE K150 CAN COPY THIS FILE FROM THE CHIP ANY HELP WOULD BE GREAT
CLIVE


Mon May 12, 2014 3:54 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 635
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
Can you connect your original working device, read in the data by clicking the 'read' button and then click the 'fuses' button. A new window should open up . Could you tell me the what the CPD and Code protect fuses say.

Does the entire ROM window show zero's ?

_________________
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.


Mon May 12, 2014 4:21 pm
Profile

Joined: Mon Mar 31, 2014 7:53 pm
Posts: 4
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
WDT= ENA MCLRE= DIS CPD=DIS INEX SWITCH OVER=DIS OSC=INTRC_10 PWRTE=DIS CODE PRO=ENA BODEN=BOD OFF SBODEN OFF FAIL CLOCK MON=DISA
YES AL ROM DATA ARE ZEROES AND ALL EEPROM ARE F
Clive


Tue May 13, 2014 4:22 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 635
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
I'm afraid it looks like whoever originally programmed the device blew the code protection fuse. This is a copy protection system that is built into PIC devices (and other microcontrollers) that is designed to stop you from being able to read the program back out of the device to copy it. This will be the reason why you are only able to read zero's out of its ROM.

_________________
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.


Tue May 13, 2014 4:52 pm
Profile

Joined: Sun Jan 11, 2015 12:22 am
Posts: 4
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
Hi

i got my programmer today and have not been able to get it to work. I have looked through the posts but still am having issues.

I am trying to load a LED prog onto a 12F683

I have checked its in the correct place for programming

Im running Windows 7 64 bit

here are some images, hope they are useful

Image

Image

Image

Image

Image

Image

Image

Hopefully you can help me to get this working

thx
jason


You do not have the required permissions to view the files attached to this post.


Sun Jan 11, 2015 1:36 am
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 635
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
From your screenshots it looks like everything is installed correctly, you are running the correct version of the software, and the software is correctly seeing the K150 programmer. One thing you can try is increasing the program delay time for your device. There is a bit of information on how to do this at the bottom of the first post in this thread. this may not work in your case but it is worth a try as it is relatively easy to do and may fix the problem.

_________________
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.


Mon Jan 12, 2015 10:40 am
Profile

Joined: Sun Jan 11, 2015 12:22 am
Posts: 4
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
already tried increasing it by 10 each time, ended up at 140 and figured something wasn't right


Mon Jan 12, 2015 6:39 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 635
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
Ok well it doesn't seem to be a setup problem. If you can, try a different USB cable. It does sound unlikely but cables are more likely to fail then the boards themselves and can fail in a way where the board still appears in device manager. Failing that, are you able to confirm that your PIC is working?

_________________
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.


Tue Jan 13, 2015 9:39 am
Profile

Joined: Sun Jan 11, 2015 12:22 am
Posts: 4
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
tried 3 different PIC of the same type and no change. usb also made no difference


Fri Jan 16, 2015 11:01 pm
Profile

Joined: Sun Jan 11, 2015 12:22 am
Posts: 4
Post Re: Pic - K150 ICSP Programmer (HCDVBD0002)
still isnt working


Wed Jan 21, 2015 7:54 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 99 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Thank you to phpBB.com & phpBB.ro.
Design created by Florea Cosmin Ionut.
© 2011 All contents of this site are © Hobby Components LTD