forum.hobbycomponents.com
http://forum.hobbycomponents.com/

RFID (ID) Access Control Panel (HCRFID0002)
http://forum.hobbycomponents.com/viewtopic.php?f=82&t=1463
Page 1 of 1

Author:  admin [ Tue Sep 24, 2013 1:40 pm ]
Post subject:  RFID (ID) Access Control Panel (HCRFID0002)

Image

Image
Rear mounting bezel removed to show internal components.


Description:

The Hobby Components RFID (ID) panel is a complete working door access security system that allows secure door entry using readily available RFID tags or cards for up to 500 different users. The panel can be programmed from the integrated keypad using a master code. This allows adding and deleting cards & pin numbers and changing various setting such as door open times, door forced alarms, etc. An external 12V DC power supply is required which can also be used to power the magnetic/solenoid door lock which is to be controlled by the panel. A door sensor can be connected to the panel for monitoring forced entry and an external door chime can be triggered by pressing the door bell button on the panel's keypad.

This panel is compatible with our ID type key fobs (HCRFID0001)

Specifications:

Voltage: 12VDC+10%,
Current: 1.2A
Lock Relay: 12VDC/2A
Environmental Temperature working: 0℃~45℃; storage: -10℃~55℃
Relative humidity working:40%~90%RH; storage:-20%~90%RH
Card Capacity: 500
PIN Capacity: Public PIN:1 Private PIN:500
Internal Reader Frequency ID model: 125KHz
IC model: 13.56MHz
Proximity Card ID model: EM or compatible
IC model: Mifare1 or compatible
Card Reading Distance: ID model:5 - 15CM
IC model: 3 - 5CM
Lock interface: Relay output or level output
Exit Button: One interface
Bell: One interface
Door Contact: One interface (NC/NO)
Alarm Interface: One level output
External Reader: One weigand26 interface (Only apply to certain models)

Example connection diagram:

Image

Author:  aaa56 [ Mon Mar 16, 2015 8:21 am ]
Post subject:  Re: RFID (ID) Access Control Panel (HCRFID0002)

Dear Admin,
about the panel, I'd like to know more informations regarding containing hardware,
schematic, programming, etc.
Thanks

Author:  andrew [ Mon Mar 16, 2015 2:16 pm ]
Post subject:  Re: RFID (ID) Access Control Panel (HCRFID0002)

The panel isn't an open source product so I'm afraid schematics and source code aren't available. It does however come with an English manual showing how to program it. I'll be uploading another image to the first post shortly that will show the innards. That will give you a better idea of what's inside the panel.

Author:  Jordi [ Mon Apr 23, 2018 2:12 pm ]
Post subject:  Re: RFID (ID) Access Control Panel (HCRFID0002)

Hi, i have just bought one and i realize that i have to "show" the rfid key to enroll it.
Can i enroll a key by presing the serial number as i have allways done with my old rfid panel (the same)?
Thx

Author:  andrew [ Mon Apr 23, 2018 3:47 pm ]
Post subject:  Re: RFID (ID) Access Control Panel (HCRFID0002)

I'm afraid I don't know of any other way other than the method stated in the instructions.

Quote:
as i have allways done with my old rfid panel (the same)?


Are you saying that your previous panel was the same model and it had this ability?

Author:  Jordi [ Mon Apr 23, 2018 9:31 pm ]
Post subject:  Re: RFID (ID) Access Control Panel (HCRFID0002)

andrew wrote:
I'm afraid I don't know of any other way other than the method stated in the instructions.

Quote:
as i have allways done with my old rfid panel (the same)?


Are you saying that your previous panel was the same model and it had this ability?


No, i had the same model but not purchased at hobbycomponents (or not recently, i really don't know where was it from).

I could enroll the rfid keys entering key number instead of "showing".

There is no programing mode to enter the key number? (not in instructions)

Thx

Author:  andrew [ Tue Apr 24, 2018 2:27 pm ]
Post subject:  Re: RFID (ID) Access Control Panel (HCRFID0002)

Nothing we are aware of I'm afraid. I've looked at the instructions myself and it seems that presenting the card to the reader is the only way to add key.

Author:  Jordi [ Wed Apr 25, 2018 3:32 pm ]
Post subject:  Re: RFID (ID) Access Control Panel (HCRFID0002)

Well, thanks anyway andrew.
I'll work that way.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/