RFID (ID) Access Control Panel (HCRFID0002)
RFID (ID) Access Control Panel (HCRFID0002)
Rear mounting bezel removed to show internal components.
Description:
The Hobby Components RFID (ID) panel is a complete working door access security system that allows secure door entry using readily available RFID tags or cards for up to 500 different users. The panel can be programmed from the integrated keypad using a master code. This allows adding and deleting cards & pin numbers and changing various setting such as door open times, door forced alarms, etc. An external 12V DC power supply is required which can also be used to power the magnetic/solenoid door lock which is to be controlled by the panel. A door sensor can be connected to the panel for monitoring forced entry and an external door chime can be triggered by pressing the door bell button on the panel's keypad.
This panel is compatible with our ID type key fobs (HCRFID0001)
Specifications:
Voltage: 12VDC+10%,
Current: 1.2A
Lock Relay: 12VDC/2A
Environmental Temperature working: 0℃~45℃; storage: -10℃~55℃
Relative humidity working:40%~90%RH; storage:-20%~90%RH
Card Capacity: 500
PIN Capacity: Public PIN:1 Private PIN:500
Internal Reader Frequency ID model: 125KHz
IC model: 13.56MHz
Proximity Card ID model: EM or compatible
IC model: Mifare1 or compatible
Card Reading Distance: ID model:5 - 15CM
IC model: 3 - 5CM
Lock interface: Relay output or level output
Exit Button: One interface
Bell: One interface
Door Contact: One interface (NC/NO)
Alarm Interface: One level output
External Reader: One weigand26 interface (Only apply to certain models)
Example connection diagram:
Re: RFID (ID) Access Control Panel (HCRFID0002)
Dear Admin,
about the panel, I'd like to know more informations regarding containing hardware,
schematic, programming, etc.
Thanks
about the panel, I'd like to know more informations regarding containing hardware,
schematic, programming, etc.
Thanks
Re: RFID (ID) Access Control Panel (HCRFID0002)
The panel isn't an open source product so I'm afraid schematics and source code aren't available. It does however come with an English manual showing how to program it. I'll be uploading another image to the first post shortly that will show the innards. That will give you a better idea of what's inside the panel.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
Re: RFID (ID) Access Control Panel (HCRFID0002)
Hi, i have just bought one and i realize that i have to "show" the rfid key to enroll it.
Can i enroll a key by presing the serial number as i have allways done with my old rfid panel (the same)?
Thx
Can i enroll a key by presing the serial number as i have allways done with my old rfid panel (the same)?
Thx
Re: RFID (ID) Access Control Panel (HCRFID0002)
I'm afraid I don't know of any other way other than the method stated in the instructions.
Are you saying that your previous panel was the same model and it had this ability?as i have allways done with my old rfid panel (the same)?
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
Re: RFID (ID) Access Control Panel (HCRFID0002)
No, i had the same model but not purchased at hobbycomponents (or not recently, i really don't know where was it from).andrew wrote:I'm afraid I don't know of any other way other than the method stated in the instructions.
Are you saying that your previous panel was the same model and it had this ability?as i have allways done with my old rfid panel (the same)?
I could enroll the rfid keys entering key number instead of "showing".
There is no programing mode to enter the key number? (not in instructions)
Thx
Re: RFID (ID) Access Control Panel (HCRFID0002)
Nothing we are aware of I'm afraid. I've looked at the instructions myself and it seems that presenting the card to the reader is the only way to add key.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
Re: RFID (ID) Access Control Panel (HCRFID0002)
Well, thanks anyway andrew.
I'll work that way.
I'll work that way.
-
- Posts: 1
- Joined: Thu Sep 27, 2018 4:09 am
Re: RFID (ID) Access Control Panel (HCRFID0002)
Hi,
Recently I have purchased the same from [URL REMOVED BY ADMIN] . Unfortunately I received a faulty product. It is not giving any audioable/ beep notifications.
Can you please furnish the circuit diagram of the same so that I can check and rectify the same.
Thx
Recently I have purchased the same from [URL REMOVED BY ADMIN] . Unfortunately I received a faulty product. It is not giving any audioable/ beep notifications.
Can you please furnish the circuit diagram of the same so that I can check and rectify the same.
Thx
Re: RFID (ID) Access Control Panel (HCRFID0002)
As this is a closed sourced product I'm afraid a schematic is not available. If it's faulty I would suggest contacting the seller to arrange a return.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.