RFID (ID) Access Control Panel (HCRFID0002)

RFID kits, modules and tags
Post Reply
admin
Site Admin
Posts: 720
Joined: Sun Aug 05, 2012 4:02 pm

RFID (ID) Access Control Panel (HCRFID0002)

Post by admin » Tue Sep 24, 2013 1:40 pm

Image

Image
Rear mounting bezel removed to show internal components.


Description:

The Hobby Components RFID (ID) panel is a complete working door access security system that allows secure door entry using readily available RFID tags or cards for up to 500 different users. The panel can be programmed from the integrated keypad using a master code. This allows adding and deleting cards & pin numbers and changing various setting such as door open times, door forced alarms, etc. An external 12V DC power supply is required which can also be used to power the magnetic/solenoid door lock which is to be controlled by the panel. A door sensor can be connected to the panel for monitoring forced entry and an external door chime can be triggered by pressing the door bell button on the panel's keypad.

This panel is compatible with our ID type key fobs (HCRFID0001)

Specifications:

Voltage: 12VDC+10%,
Current: 1.2A
Lock Relay: 12VDC/2A
Environmental Temperature working: 0℃~45℃; storage: -10℃~55℃
Relative humidity working:40%~90%RH; storage:-20%~90%RH
Card Capacity: 500
PIN Capacity: Public PIN:1 Private PIN:500
Internal Reader Frequency ID model: 125KHz
IC model: 13.56MHz
Proximity Card ID model: EM or compatible
IC model: Mifare1 or compatible
Card Reading Distance: ID model:5 - 15CM
IC model: 3 - 5CM
Lock interface: Relay output or level output
Exit Button: One interface
Bell: One interface
Door Contact: One interface (NC/NO)
Alarm Interface: One level output
External Reader: One weigand26 interface (Only apply to certain models)

Example connection diagram:

Image

aaa56
Posts: 2
Joined: Mon Feb 09, 2015 5:33 pm

Re: RFID (ID) Access Control Panel (HCRFID0002)

Post by aaa56 » Mon Mar 16, 2015 8:21 am

Dear Admin,
about the panel, I'd like to know more informations regarding containing hardware,
schematic, programming, etc.
Thanks

andrew
Site Admin
Posts: 785
Joined: Sun Aug 05, 2012 4:15 pm

Re: RFID (ID) Access Control Panel (HCRFID0002)

Post by andrew » Mon Mar 16, 2015 2:16 pm

The panel isn't an open source product so I'm afraid schematics and source code aren't available. It does however come with an English manual showing how to program it. I'll be uploading another image to the first post shortly that will show the innards. That will give you a better idea of what's inside the panel.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Jordi
Posts: 3
Joined: Mon Apr 23, 2018 1:54 pm

Re: RFID (ID) Access Control Panel (HCRFID0002)

Post by Jordi » Mon Apr 23, 2018 2:12 pm

Hi, i have just bought one and i realize that i have to "show" the rfid key to enroll it.
Can i enroll a key by presing the serial number as i have allways done with my old rfid panel (the same)?
Thx

andrew
Site Admin
Posts: 785
Joined: Sun Aug 05, 2012 4:15 pm

Re: RFID (ID) Access Control Panel (HCRFID0002)

Post by andrew » Mon Apr 23, 2018 3:47 pm

I'm afraid I don't know of any other way other than the method stated in the instructions.
as i have allways done with my old rfid panel (the same)?
Are you saying that your previous panel was the same model and it had this ability?
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Jordi
Posts: 3
Joined: Mon Apr 23, 2018 1:54 pm

Re: RFID (ID) Access Control Panel (HCRFID0002)

Post by Jordi » Mon Apr 23, 2018 9:31 pm

andrew wrote:I'm afraid I don't know of any other way other than the method stated in the instructions.
as i have allways done with my old rfid panel (the same)?
Are you saying that your previous panel was the same model and it had this ability?
No, i had the same model but not purchased at hobbycomponents (or not recently, i really don't know where was it from).

I could enroll the rfid keys entering key number instead of "showing".

There is no programing mode to enter the key number? (not in instructions)

Thx

andrew
Site Admin
Posts: 785
Joined: Sun Aug 05, 2012 4:15 pm

Re: RFID (ID) Access Control Panel (HCRFID0002)

Post by andrew » Tue Apr 24, 2018 2:27 pm

Nothing we are aware of I'm afraid. I've looked at the instructions myself and it seems that presenting the card to the reader is the only way to add key.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Jordi
Posts: 3
Joined: Mon Apr 23, 2018 1:54 pm

Re: RFID (ID) Access Control Panel (HCRFID0002)

Post by Jordi » Wed Apr 25, 2018 3:32 pm

Well, thanks anyway andrew.
I'll work that way.

Post Reply