LiPo charging with step up boost converter module (HCMODU0131)
Posted: Wed Sep 05, 2018 1:06 pm
This module is a small single cell lithium battery charging module which also includes a 1A step-up (boost) converter for powering a large range of applications. The module will charge most types of single cell (3.7) LiPo batteries from either 4 to 7.5V power supply input, or from a standard 5V USB port/adapter. A battery charge and standby LED is also included for visual indication.
Besides battery charging capabilities this module also includes an adjustable boost converter which is capable of stepping up the attached battery voltage from 4.5 to 24V with a maximum supply current of 1A (see table).
Hobby components notes:
If powering from USB or 'IN' terminals a suitable LiPo battery must be connected for correct operation of boost converter.
Do not connect power to 'IN' terminal whilst powering from the USB connector
Specification:
Product code: HCMODU0131
Input Voltage (USB): 5V
Input Voltage (IN): 4 - 7.5V
Battery type: LiPo 3.7
Default charging current: 1000mA
Output voltage (VOUT): 4.5 - 24V
Max output current (VOUT): 1A
Dimensions: 33mm x 24mm
FAQ:
Is it possible to change the charge current?
Yes but this requires changing the surface mount 1.2K (122) sense resistor. Please note that we do not recommend modifying this component unless you have experience with soldering small surface mount components. Unfortunately we cannot replace a module damaged due to this modification. You can change the charge current with the following resistor values:
Can I use the boost converter without a battery connected.
Yes but you will need power the module via the 'BAT' terminals instead of the 'IN' terminals. When powering from these terminals the supply voltage must be between 1.8 to 6.5V.
Does this module have battery low voltage shutdown?
The boost convector will go into shutdown mode if the battery voltage drops below 1.8V
Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.
Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.