Page 1 of 1

LM2596 DC-DC 3-35V Stepdown Power Supply Module (HCMODU0024)

Posted: Fri Mar 04, 2016 4:09 pm
by admin
Image

This DC to DC Step-Down Adjustable Power Supply Module is based on the LM2596 switching regulator.

Input voltage: 4-35V
Output Voltage: 1.5-35V (adjustable)
Output current: rated current 2A, maximum 3A (heat sink required)
Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting
Operating temperature: Industrial grade (-40 to +85) (output power 10W or less)
Full load temperature rise: 40
Load regulation: ± 0.5%
Voltage regulation: ± 0.5%
Dynamic response speed: 5% 200uS

Output ripple:
Input 12V Output 5V 3A 60mV (MAX)
Input 24V Output 12V 3A 120mV (MAX)


Image


Dimensions:


Image



Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.

Re: LM2596 DC-DC 3-35V Stepdown Power Supply Module (HCMODU0

Posted: Wed Feb 08, 2017 2:00 pm
by mmcp42
I just bought five of these from you
they are all working ok, but ...
there seems to be two different sizes
not normally a problem, but I sized a PCB for the smaller board, and, of course, the bigger ones don't fit
is there any way of obtaining only the smaller size boards (43mm x 20mm) instead of the larger ones (48mm x 23mm)
thanks

Re: LM2596 DC-DC 3-35V Stepdown Power Supply Module (HCMODU0

Posted: Wed Feb 08, 2017 3:40 pm
by andrew
Sorry about this. I've looked into it and it does seem an that older batch we received last year did have larger dimensions. Our normal stock should be the smaller sized as advertised. If you need to be sure when placing an order the best thing to do is to either send an email to sales at hobbycomponents.com or just leave a note in the order when you checkout and we'll make sure they are the size you require.

For your existing issue if you send an email to sales referencing this post we'll see if we do something to resolve it.

Re: LM2596 DC-DC 3-35V Stepdown Power Supply Module (HCMODU0

Posted: Wed Feb 08, 2017 4:28 pm
by mmcp42
thanks for that
email on its way to Sales

(nice board by the way - runs really cold!)

Re: LM2596 DC-DC 3-35V Stepdown Power Supply Module (HCMODU0024)

Posted: Sun Mar 19, 2023 9:37 am
by steve001
Great Little Board

One little comment, the hole spacings don't quite line up with standard hole spacings on a proto board.
A little bending of the header pins sorted this out though using lead forming pliers.

Length 44.8 mm = 17.63 Holes on a standard 2.54 mm pitch Board
Width 19.4 mm = 7.63 Holes on a standard 2.54 mm pitch Board

Would definitely recommend this board

Steve