DC-DC 5vdc Step-up Power Supply Module (HCMODU0018)

Power converter modules
Post Reply
admin
Site Admin
Posts: 725
Joined: Sun Aug 05, 2012 4:02 pm

DC-DC 5vdc Step-up Power Supply Module (HCMODU0018)

Post by admin » Sat Feb 15, 2014 11:12 pm

Image

Description:

This DC to DC converter (HCMODU0018) will accept a voltage between 0.9 (see note) and 5V DC and covert to 5V DC with 200mA available via its USB type A socket.

1. PFM control DC/DC boost
2. Input 0.9-5v dc, output 5v dc
3. USB interface power supply
4. LED indicator
5. Size: 34mm x 16.2mm
6. Max output current: 200mA

Note: At maximum load current input supply voltage should be above 2.5V. Below 2.5V supply maximum output current is reduced. When no load is being applied output voltage may rise above 5V.



Schematic:
Image
Image


Image
Actual bench measurements created by Hobby Components Ltd.

Datasheet:
HCMODU0018_CE8301_Datasheet.pdf
You do not have the required permissions to view the files attached to this post.

WA822
Posts: 2
Joined: Sat Feb 15, 2014 7:53 pm

Re: PLEASE READ BEFORE REQUESTING TECHNICAL SUPPORT

Post by WA822 » Sat Feb 15, 2014 11:12 pm

hi,
Is there some data on the DC-D step-up converter HCMODU0018?

regards,
Andrew

admin
Site Admin
Posts: 725
Joined: Sun Aug 05, 2012 4:02 pm

Re: PLEASE READ BEFORE REQUESTING TECHNICAL SUPPORT

Post by admin » Mon Feb 17, 2014 11:22 am

As requested this has now been created. I have moved your post from its original location as it was off topic there.

Post Reply