A4982 stepper motor controller (HCMODU00126)

Stepper and DC type motor drivers
Post Reply
admin
Site Admin
Posts: 726
Joined: Sun Aug 05, 2012 4:02 pm

A4982 stepper motor controller (HCMODU00126)

Post by admin » Tue Oct 03, 2017 2:50 pm

Image




The A4982 is an improved version of the A4988 stepstick stepper motor controller. The module uses the A4982 IC rather than the A4988. The advantage is the chip comes in a bigger package, so heat transfer and dissipation are better. his stepstick uses a 4 layer, heavy copper board which has been show to deliver good heat dissipation as shown by the stepper driver thermal tests. Unlike many other stepstick variations this one is open source hardware, the design files are available on github.

https://github.com/T3P3/IceBlueStepstick

Note that this driver does not allow for 1/8 microstepping, only full, 1/2, 1/4 and 1/16. However this is not a problem in most applications where 1/16 is used as a standard. See Stepstick redesign for more detail on the design changes.



Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.

Post Reply