Re: PT2262 & PT2272 Wireless Modules (HCMODU0040 & HCMODU004
I purchased a set of PT2262 / PT2272 433 Mhz from your ebay store.
Upon testing I discovered a possible limitation for my intended use, which I would like to clarify with you.
My intention is to have the the receiver reacting to all the four channels of the transmitter continuously - not one channel at a time.
For example, let's say CH 1 is activated (pulled high) on the TX module and KEPT ACTIVATED. (This causes CH1 on the RX module to go high and remain high.) At the same time, CH2 is also activated on the TX module. This does not trigger CH2 on the RX module.
I found a post by Andrew on this forum saying
So most probably this explains my problem.
NB: In the past I had achieved my intention using an HT6320 and HT6350 pair. I thought that this kit that i just purchased would do the same!