TTP223 Capacitive Touch Sensor (HCSENS0039)

Modules for various types of sensors including accelerometers. gyro's, IR motion, etc
Post Reply
admin
Site Admin
Posts: 725
Joined: Sun Aug 05, 2012 4:02 pm

TTP223 Capacitive Touch Sensor (HCSENS0039)

Post by admin » Tue Apr 25, 2017 11:29 am

ImageImage





A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered. When triggered the modules output will switch from its idle low state to high (default operation). Solder jumpers allow for reconfiguring its mode of operation to be either active low or toggle output.



Image


Specification:

Product Code: HCSENS0039
Supply Voltage: 2.5 to 5.5V
Supply current: (Vcc = 5V): 6uA (Idle) 16mA (Active)
Sensor area: 11 x 10.5mm
Max sensor range: ~5mm
Module dimensions: 14.5mm x 11mm



FAQ:

Will this module work if the sensor is placed behind a piece of perspex?

Yes, the module will work behind most types of material so long as they don't block or interfere with electromagnetic signals and the materials thickness does not exceed the maximum sensor range.



Image
TTP223.pdf


Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.
You do not have the required permissions to view the files attached to this post.

bish
Posts: 1
Joined: Fri Sep 22, 2017 3:35 am

Re: TTP223 Capacitive Touch Sensor (HCSENS0039)

Post by bish » Sat Sep 23, 2017 6:54 pm

Hello,

Can someone please explain to me as I'm a bit thick when it comes to electronics how to switch this module to low power toggle mode?

Thanks

andrew
Site Admin
Posts: 792
Joined: Sun Aug 05, 2012 4:15 pm

Re: TTP223 Capacitive Touch Sensor (HCSENS0039)

Post by andrew » Mon Sep 25, 2017 8:39 am

Although the TP223 has a low power/ fast mode feature the SOT-23 version of the device used in these modules does't have the pin (LPMB) to select it. If I understand the datasheet correctly I believe the device is permanently fixed to fast mode.

To switch the module to toggle mode you need to bridge the two pads marked 'B' with a small blob of solder. This will pull the TOG pin high switching it to toggle mode.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Post Reply