TTP223B Touch Sensing Module (HCSENS0022)

Modules for various types of sensors including accelerometers. gyro's, IR motion, etc
Post Reply
admin
Site Admin
Posts: 866
Joined: Sun Aug 05, 2012 4:02 pm

TTP223B Touch Sensing Module (HCSENS0022)

Post by admin » Sat Aug 23, 2014 7:23 am

Image

This module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In its normal state, the module output is low and has a low power consumption; When touched the modules output turns high and if not touched for 12 seconds switches back to low-power mode.

Features
Low power consumption
Power supply of 2 ~ 5.5V DC
Four M2 screw holes for easy installation

Specification
Control Interface : A total of three pins (GND, VCC, SIG), GND to ground , VCC is power, SIG is the digital signal output pin

Power Indicator : Green LED

Positioning holes : 4 M2 screw positioning holes with a diameter of 2.2mm

Schematic
Image

Image

TTP223 Datasheet
HCSENS0022_Chip_Datasheet.pdf
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Sensors”