Reply to topic  [ 1 post ] 
IC Strip Board (HCPROT0089 - 92) 
Author Message
Site Admin

Joined: Sun Aug 05, 2012 4:02 pm
Posts: 650
Post IC Strip Board (HCPROT0089 - 92)
Image




A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 25mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.5mm. This board has 392 pads for IC pins, each one has the measurements 5mm x 0.3mm. These are divided into two 196 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image


A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 25mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.65mm. This board has 308 pads for IC pins, each one has the measurements 5mm x 0.3mm. These are divided into two 154 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image

A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 20mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.95mm. This board has 208 pads for IC pins, each one has the measurements 5mm x 0.4mm. These are divided into two 104 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image

A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 20mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 1.27mm. This board has 156 pads for IC pins, each one has the measurements 5mm x 0.5mm. These are divided into two 78 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image

Further Information
Attachment:
ICStripBoard.pdf


You do not have the required permissions to view the files attached to this post.


Thu Mar 02, 2017 2:56 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Thank you to phpBB.com & phpBB.ro.
Design created by Florea Cosmin Ionut.
© 2011 All contents of this site are © Hobby Components LTD