IC Strip Board (HCPROT0089 - 92)

Tools, nuts & bolts, pillars, cable ties, etc.
Post Reply
admin
Site Admin
Posts: 726
Joined: Sun Aug 05, 2012 4:02 pm

IC Strip Board (HCPROT0089 - 92)

Post by admin » Thu Mar 02, 2017 2:56 pm

Image




A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 25mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.5mm. This board has 392 pads for IC pins, each one has the measurements 5mm x 0.3mm. These are divided into two 196 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image


A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 25mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.65mm. This board has 308 pads for IC pins, each one has the measurements 5mm x 0.3mm. These are divided into two 154 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image

A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 20mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 0.95mm. This board has 208 pads for IC pins, each one has the measurements 5mm x 0.4mm. These are divided into two 104 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image

A Universal IC Strip Break Out Board designed on 0.8mm FR4 Tg 140C with a HASL finish. It is 20mm x 100mm in size. It has been designed to work with the majority of In-line IC’s with a pitch or space between pads of 1.27mm. This board has 156 pads for IC pins, each one has the measurements 5mm x 0.5mm. These are divided into two 78 long strips which can accommodate a large variety of ICs for soldering and experimentation. It has been designed so that it can be cut to size of the IC you want to use allowing you to experiment with multiple IC’s.

Image

Further Information
ICStripBoard.pdf
You do not have the required permissions to view the files attached to this post.

Post Reply