HCMRunner Library for Hobby Components Maze Runner

Useful guides, libraries, and example sketches to support our Arduino based products.
Post Reply
admin
Site Admin
Posts: 726
Joined: Sun Aug 05, 2012 4:02 pm

HCMRunner Library for Hobby Components Maze Runner

Post by admin » Mon Jan 25, 2016 11:05 am

[IMAGE TBA]



This library has been written specifically for use with the Hobby Components Maze Runner robotic vehicle (HCROBO0052). It provides the ability to reprogram the Maze runner using the Arduino IDE which means with just the addition of a programming cable you can reprogram the Maze runner to follow your own commands. This opens the Maze Runner up to not just being a maze solving robot, but a general purpose robotic vehicle.

Detailed descriptions of the available functions within this library are provided in the accompanying manual that is provided with the Maze Runner kit. The libarary also contains example sketches including the maze solving sketch that comes pre-programmed in to the Maze Runner.

You will need to download (please log in to download the library) and unzip this library to the Arduino development environments library area.

On Windows:
My Documents\Arduino\libraries\

On Mac:
Docments/Arduino/libraries/
or similarly for Linux.


Image

Maze Runner library (please log in to download):
HCMRunner.zip
You do not have the required permissions to view the files attached to this post.

ChrisJ
Posts: 7
Joined: Mon Dec 30, 2013 11:34 am

Re: HCMRunner Library for Hobby Components Maze Runner

Post by ChrisJ » Sun Feb 07, 2016 10:02 pm

Hi Andrew

Note it is possible to wire the motors in the wrong polarity (as I did), the instructions are not clear, then (obviously) the robot won't work correctly as the motors run reversed.

Chris

andrew
Site Admin
Posts: 796
Joined: Sun Aug 05, 2012 4:15 pm

Re: HCMRunner Library for Hobby Components Maze Runner

Post by andrew » Mon Feb 08, 2016 10:07 am

Hi Chris,

Thanks for pointing it out. I've now added an errata section to Maze Runner post with a diagram showing the correct orientation. You can find it here: http://www.hobbycomponents.com/mazerunner
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Post Reply