Page 1 of 1

Brass 3D printer nozzle 1.75mm / 0.4mm aperture (HC3DPR0054)

Posted: Tue Oct 03, 2017 2:43 pm
by admin
Image




Brass nozzle for common types of 3D printer a6 a8 MK8 Extruder Makerbot 3d etc. Accepts 1.75mm filament and has an extrusion aperture of 0.4mm


Image



Product code: HC3DPR0054
Product material: Brass
Nozzle aperture: 0.4mm
Thread diameter: 6 mm


Image


Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do no provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.

Re: Brass 3D printer nozzle 1.75mm / 0.4mm aperture (HC3DPR0054)

Posted: Tue May 28, 2019 3:01 pm
by ILYBTodd
Can you confirm whether these work with e3D Lite6 hot end?

Re: Brass 3D printer nozzle 1.75mm / 0.4mm aperture (HC3DPR0054)

Posted: Wed May 29, 2019 8:19 am
by andrew
It's difficult to comment on the compatibility of a product we don't currently sell, especially in this case where information on the nozzle dimensions is limited. One thing I did see is that they mention the nozzles which are compatible with their own hot ends are also compatible with Prusa printers so based on that information alone it would suggest it would fit.

A few extra dimensions of this nozzle that may also help:

Ext barrel diameter (excluding thread): 5.5mm
Ext barrel diameter (inc thread): 5mm
int barrel diameter: 2.75mm
Barrel length (ex tip): 5.75mm