|PLA Filament for 3D Printing 1.75mm Orange (HC3DPR0026)
|Page 1 of 1|
|Author:||admin [ Tue Jul 26, 2016 2:37 pm ]|
|Post subject:||PLA Filament for 3D Printing 1.75mm Orange (HC3DPR0026)|
PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.
Optimum extruder temperature is 200-220C
Optimum bed temperature is 50-70C
Reel weight (approx): 1KG (1.3KG including the reel itself)
Length of Filament: approximately 350m
Dark Blue (HC3DPR0019)
Flourescent Green (HC3DPR0020)
Pastel Pink (HC3DPR0024)
The temperatures above are based on most printers, but please be aware that they may need adjusting depending on your printer.
Please keep the product in a dry place,and avoid direct sunlight, fire and water.
|Page 1 of 1||All times are UTC|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group