Page 1 of 1

PLA Filament for 3D Printing 1.75mm Gold (HC3DPR0025)

Posted: Tue Jul 26, 2016 2:36 pm
by admin
Image



PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

Optimum extruder temperature is 200-220C
Optimum bed temperature is 50-70C
Type: PLA
Reel weight (approx): 1KG (1.3KG including the reel itself)
Length of Filament: approximately 350m

Colours available:
White (HC3DPR0017)
Black (HC3DPR0018)
Dark Blue (HC3DPR0019)
Flourescent Green (HC3DPR0020)
Red (HC3DPR0021)
Purple/Pink (hc3DPR0022)
Pastel Pink (HC3DPR0024)
Gold (HC3DPR0025)
Orange (HC3DPR0026)

The temperatures above are based on most printers, but please be aware that they may need adjusting depending on your printer.

Please keep the product in a dry place,and avoid direct sunlight, fire and water.

Re: PLA Filament for 3D Printing 1.75mm Gold (HC3DPR0025)

Posted: Sat May 06, 2017 4:38 pm
by Twitir1939
where can you get those for cheap

Re: PLA Filament for 3D Printing 1.75mm Gold (HC3DPR0025)

Posted: Mon May 08, 2017 8:58 am
by andrew
They are available for purchase from the 3D printing/ consumables section of our shop:

http://hobbycomponents.com/212-consumables