Reply to topic  [ 1 post ] 
TinyShield Proto Board (HCTICI0027) 
Author Message
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 629
Post TinyShield Proto Board (HCTICI0027)
Image

See our Tiny Circuits Range Here.


Image

This proto board brings all of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

This proto board brings all of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

This proto board can be ordered with or without a top stackable connector. By default, a top connector is not needed since the standard method is to use this proto board as the top board in a TinyDuino stack which allows the easiest access to the signals. However when this board is ordered with the top stackable connector, the proto board can be located in an inner layer of the TinyDuino stack which is useful for some projects.

Note: This TinyShield replaces all of the older style Proto1, Proto2 and Proto3 boards which have been discontinued so any stock of the previous boards that we still have, will be our last.


Image

Ultra compact size and weight (smaller than a US Quarter!)
Square Version: 20mm x 20mm (.787 inches x .787 inches)
Max Height (No Top Connector): (from lower bottom TinyShield Connector to upper PCB level): 2.81mm (0.111 inches)
Max Height (With Top Connector): (from lower bottom TinyShield Connector to upper PCB level): 5.11mm (0.201 inches)
Weight (No Top Connector): 0.70 grams
Weight (With Top Connector): 0.85 grams


Includes the following signals:

VCC, VBATT,+3V3, +5V, VIN, GND, RSV2, RSV1, RSV0, RESET
IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7, IO8, IO9
SS, MOSI, MISO, SCK, AREF, AD0, AD1, AD2, AD3, AD4/SDA, AD5/SDL


Image

Attachment:
HCTICI0027_Schematic.pdf


You do not have the required permissions to view the files attached to this post.

_________________
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.


Wed Oct 07, 2015 12:55 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Thank you to phpBB.com & phpBB.ro.
Design created by Florea Cosmin Ionut.
© 2011 All contents of this site are © Hobby Components LTD