TinyCircuits TinyLily Power Adaptor Board (HCTICI0016)

TinyCircuits product range including TindyDuino and TinyLili.
Post Reply
admin
Site Admin
Posts: 866
Joined: Sun Aug 05, 2012 4:02 pm

TinyCircuits TinyLily Power Adaptor Board (HCTICI0016)

Post by admin » Tue Mar 11, 2014 2:22 pm

Image

See our Tiny Circuits Range Here.


Description:
Connect up your TinyLily Mini to standard battery packs that use the JST-PH connector. You can also use this without the JST connector with two large through holes to connect to an external power supply or battery pack

For a suitable cable to connect an external power supply via the JST connect see item (HCCABL0011) in our shop. Do not apply more than 5.5V to the TinyLili mini processor board via this interface as you will cause permanent damage.


Specification:
Washable
2-Pin JST PH Connector to allow external batteries to be plugged in
Includes two solder tabs as an extra point to bring in external power
Robust Gold Finish – makes soldering easy and is non-corrosive
Ultra compact size and weight
Dimensions: 16mm x 10mm (0.63 inches x 0.39 inches)
Max Height: 6.23mm (0.245 inches)
Ultra-thin 0.61mm (0.024 inches) PCB
Weight: TBD grams (TBD ounces)

Schematic:
ASL1201_Rev1.pdf
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “TinyCircuits”